Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp4.995.000
Tascam Portastudio 414 MK1 4-Track Cassette Recorder BRAND NEW
Rp4.995.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
BRAND NEW, DAN UDAH LANGKA ABIS DI MARKET.
A quarter-inch input jack, which can accommodate mic or line sources.
A trim pot, for setting the overall input gain, between -10dB and -50dB (mic and line level).
A main level fader.
An input source select switch; your choices are off, tape and mic/line.
A Pan pot, for placing your signal in the stereo field.
A record routing switch -- options are safe (ie. no recording), a tape track numbered 1-4 for the equivalent input channel, and a left or right input (left for channels 1 and 3, right for channels 2 and 4) for stereo recording.
Effect send 2/Tape Cue: depending on the setting of the Effect 2/Tape Cue switch (found above the master fader), this forms part of a basic 4:1 monitor mixer (independent of the main mixer), or can be used as a second post-fade effects (auxiliary) send.
Effect send 1, for connection to an effects processor.
EQ Low, shelving at 100Hz, with 10dB cut or boost.
EQ High, shelving at 10kHz, with 10dB cut or boost.
An LED bargraph meter, which provides a readout of the playback or record level of each track.
A record-ready LED: this flashes in record standby mode, and lights fully when recording is actually taking place.
A quarter-inch input jack, which can accommodate mic or line sources.
A trim pot, for setting the overall input gain, between -10dB and -50dB (mic and line level).
A main level fader.
An input source select switch; your choices are off, tape and mic/line.
A Pan pot, for placing your signal in the stereo field.
A record routing switch -- options are safe (ie. no recording), a tape track numbered 1-4 for the equivalent input channel, and a left or right input (left for channels 1 and 3, right for channels 2 and 4) for stereo recording.
Effect send 2/Tape Cue: depending on the setting of the Effect 2/Tape Cue switch (found above the master fader), this forms part of a basic 4:1 monitor mixer (independent of the main mixer), or can be used as a second post-fade effects (auxiliary) send.
Effect send 1, for connection to an effects processor.
EQ Low, shelving at 100Hz, with 10dB cut or boost.
EQ High, shelving at 10kHz, with 10dB cut or boost.
An LED bargraph meter, which provides a readout of the playback or record level of each track.
A record-ready LED: this flashes in record standby mode, and lights fully when recording is actually taking place.
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan