RADIAL HOTSHOT 48V Condenser Microphone Switcher

The HotShot 48V is a condenser microphone switcher built for silent operation on stage, allowing an artist to power their vocal mic and reroute it to feed the stage monitoring system for communicating with other band members or technicians at the press of a footswitch. LED indicators display the active output, and the footswitch itself can be configured for latching or momentary action. While the HotShot 48V is specifically designed to address issues when switching condenser microphone outputs, it works equally well with dynamic mics also.


Specifications

Audio circuit type: Footswitch controlled switching relay
Frequency response: 20Hz ~ 20kHz
Dynamic range:>140Db
Gain:0dBu
Input Impedance:Source dependent
Output Impedance:Source dependent
Common Mode Rejection Ratio:-106dB
Noise:-115dBu
Maximum Input:+26dBu


Features

Ground lift
Input Connectors:Locking XLR-F input
Output Connectors:2 XLR-M outputs


Extras:
Latch/Momentary switch, 48V phantom power


General

Construction:14 gauge steel chassis
Size (L x W x D):6.0" x 5.0" x 1.81" (153mm x 127mm x 46mm)
Weight:1.88lb (0.85Kg)
Power:400mA, 9VDC (center pin negative)

Provides 48V phantom power for condenser microphones
Redirects mic signal to communicate with band members and techs
Footswitch can be configured as a latching or a momentary switch
Silent switching with no pops or clicks through the PA system

TANYAKAN SOTCK TERLEBIH DAHULU