Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp943.000
POE Module ESP32-C3 Expands DM9501 Ethernet WIFI Bluetooth Small Gateway and Supports POE Power Supply equipped with ETH01-EVO
Rp943.000
- Kondisi: Baru
- Waktu Preorder: 25 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
POE Module ESP32-C3 Expands DM9501 Ethernet WIFI Bluetooth Small Gateway and Supports POE Power Supply equipped with ETH01-EVO
1005006598059270
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Model Number : POE Module
Condition : New
Type : Module
Brand Name : Dreamhiking
Origin : Mainland China
The POE power supply module is used with ETH01-EVO. Supports DIP and SMT welding.
Description
ETH01-EVO is an upgraded version of ETH01, which has the following advantages:
1. ETH01-EVO is upgrading its application AT firmware to AT version 2.4.2.0
2.ETH01-EVO supports POE ingress for Ethernet connections and provides a reserved POE slot for various application scenarios.
3.ETH01-EVO communicates with the controller through the SPI bus and converts the data into RJ45 signals for output via the SPI interface. On the other hand, WT32 ETH01 communicates with the controller through a PHY (Ethernet physical layer) transceiver and converts the data into RJ45 signals for output using the PHY transceiver.
Features
1.Highly integrated ESP32-C3 module with low power consumption
2.Wireless connectivity with Wi-Fi and BLE and Ethernet
3.Supports AT instructions
4.Supports a complete TCP/IP protocol stack
5.Reserved POE location
Description
ETH01-EVO is a three-in-one Internet of Things communication gateway based on the ESP32-C3 chip, supporting WIFI, Bluetooth, and Ethernet. It supports a complete TCP/IP protocol stack and AT commands, making it easy for users to achieve network connectivity for embedded devices and significantly reducing development time and cost.
The module is compatible with both surface mount and through-hole connector designs, allowing it to be soldered directly onto PCBs or used on breadboards. Additionally,
1005006598059270
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Model Number : POE Module
Condition : New
Type : Module
Brand Name : Dreamhiking
Origin : Mainland China
The POE power supply module is used with ETH01-EVO. Supports DIP and SMT welding.
Description
ETH01-EVO is an upgraded version of ETH01, which has the following advantages:
1. ETH01-EVO is upgrading its application AT firmware to AT version 2.4.2.0
2.ETH01-EVO supports POE ingress for Ethernet connections and provides a reserved POE slot for various application scenarios.
3.ETH01-EVO communicates with the controller through the SPI bus and converts the data into RJ45 signals for output via the SPI interface. On the other hand, WT32 ETH01 communicates with the controller through a PHY (Ethernet physical layer) transceiver and converts the data into RJ45 signals for output using the PHY transceiver.
Features
1.Highly integrated ESP32-C3 module with low power consumption
2.Wireless connectivity with Wi-Fi and BLE and Ethernet
3.Supports AT instructions
4.Supports a complete TCP/IP protocol stack
5.Reserved POE location
Description
ETH01-EVO is a three-in-one Internet of Things communication gateway based on the ESP32-C3 chip, supporting WIFI, Bluetooth, and Ethernet. It supports a complete TCP/IP protocol stack and AT commands, making it easy for users to achieve network connectivity for embedded devices and significantly reducing development time and cost.
The module is compatible with both surface mount and through-hole connector designs, allowing it to be soldered directly onto PCBs or used on breadboards. Additionally,
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan