GPS/GPRS/GSM Module V3.0 DFROBOT

This is an Arduino GPS/GPRS/GSM shield from DFRobot. This shield with a Quad-band GSM/GPRS engine works on frequencies EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. It also supports GPS technology for satellite navigation. It #39;s possible for your robot and control system to send messages and use the GSM network. It is controlled via AT commands (GSM07.07 ,07.05 and SIMCOM enhanced AT Commands). And the design of this shield allows you to drive the GSM amp; GPS function directly with the computer and the Arduino Board. It includes a high-gain SMD antenna for GPS and a flexible GSM antenna 8.5cm(3.35 #34;) ( U.FL connector ). SPECIFICATION Power supply: 6-12v Low power consumption (100mA@7v - GSM mode) Quad-Band 850/900/18001900MHz GPRS multi-slot class 10 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850/900 MHz) Class 1 (1 W @ 1800/1900MHz) Control via AT commands(GSM07.07 ,07.05 and SIMCOM enhanced AT Commands) Support GPS technology for satellite navigation Embeded high-gain SMD antennas for GPS amp; GSM Directly support 4*4 button pad USB/Arduino control switch Programmable switch for Arduino LED indicators for power supply, network states and working status Board Surface:Immersion Gold Switches: S1 -- Programming mode / Communication mode S2 -- Controlling interface: USB / Arduino Interfaces: Embedded SIM card holder Speaker amp; Mic Jack socket Size: 81x70mm(3.19 #34;x2.76 #34;) Specifications for SMS via GSM / GPRS Point-to-point MO and MT SMS cell broadcast Text and PDU mode Specification for GPS Receiver 42 channels, GPS L1 C/A code, High-performance STE engine Sensitivity: Tracking: -160 dBm Cold starts: -143 dBm Time-To-First-Fix: Cold starts: 30s (typ.) Hot starts: 1s (typ.) Accuracy:Horizontal position: lt;2.5m CEP Power consumption (GSM engine in idle mode):Acquisition 77mA,Tracking 76mA