Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 50

Subtotal

Rp5.055.000

JBL Control 18C/T Original Speaker Ceiling 8" Coaxial 60W

Rp5.055.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: SPEAKER
# PRODUK ORIGINAL DAN BERGARANSI RESMI , BELINYA DI " BORNEO BROTHER AUDIO " YA SAHABAT

# JAMINAN PRODUK ORIGINAL

# JAMINAN UNIT BARU ,BUKAN REKONDISI ATAU SECOND HAND

SPEAKER CEILING 8 INCH COAXIAL 60 WATT JBL CONTROL 18C/T ORIGINAL DAN GARANSI RESMI
( HARGA PER 1 UNIT )

Features

200 mm (8.0 in) high output driver with polypropylene cone and butyl rubber surround
25 mm (1.0 in) soft-dome liquid-cooled tweeter
Blind-mount backcan for quick and easy installation
Dual conduit/cable clamps
Combined 70V/100V and low impedance direct operation
•90 Watts at 8Ω nominal setting
•60W multi-tap at 70V/100V
58 Hz – 20 kHz bandwidth with 90° coverage
High 92 dB sensitivity for high maximum SPL
White or black (-BK)

Specifications

Frequency Range (-10dB) 58 Hz – 20 kHz
Frequency Response (±3 dB) 80 Hz – 16 kHz
Power Rating IEC System Long-Term Ratings (low-Z direct):
180 Watts Continuous Program Power
90 Watts Continuous Pink Noise (360W peak), 100 hr
Maximum Input Voltage 31.8 V RMS (2hrs), 63.6 V peak
Sensitivity 92 dB (1kHz - 16 kHz)
Coverage Angle 90° conical
Directivity Factor (Q) 6.0
Directivity Index (DI) 7.8 dB
Maximum SPL (1m) 112 dB (low-impedance, 118 dB peak)
110 dB (top 70V/100V tap)
Impedance 8 ohms (in direct/bypass setting)
Transformer Taps 60 W, 30 W, 15 W @ 70V or 100V (plus 7.5 W @ 70V only)
Recommended Protective High-Pass4 45 Hz high-pass (24 dB/oct) for 8ohm operation, 60 Hz for 60 W tap, 50 Hz for 30 W, 15 W & 7.5 W tap setting
Crossover Network 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
Drivers LF Driver: 200 mm (8.0 in)
HF Driver: 25 mm (1.0 in)
Input Connector Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)
Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan