4.7/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(2)66.67%
4(1)33.33%
3(0)0%
2(0)0%
1(0)0%
Stok habis
Wishlist barang ini untuk bisa diingatkan saat stok kembali tersedia atau Cari Barang Serupa.
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
DFRobot : Analog Turbidity Sensor For Arduino
Terjual 9
bintang 4.7 (3 rating)
Rp195.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: DF Robot
Product Name : Analog Turbidity Sensor For Arduino
Brand : DFRobot
✅ DESRIPTION𝗧𝗜𝗢𝗡:
The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.
Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.
✅ SPESIFIKASI𝐒𝐏𝐄𝐒𝐒𝐈:
☑Operating Voltage: 5V DC
☑Operating Current: 40mA (MAX)
☑Response Time: <500ms
☑Insulation Resistance: 100M (Min)
☑Output Method:Analog
☑Analog output: 0-4.5V
☑Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
☑Operating Temperature: 5℃~90 ℃
☑Storage Temperature: -10℃~90℃
☑Weight: 30g
☑Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inche
✅ PACKING LIST𝐋𝐈𝐒𝐓:
☑Turbidity sensor adapter x1
☑Turbidity sensor probe x1
☑Turbidity sensor cable x1
☑Gravity analog sensor cable x1
Brand : DFRobot
✅ DESRIPTION𝗧𝗜𝗢𝗡:
The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.
Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.
✅ SPESIFIKASI𝐒𝐏𝐄𝐒𝐒𝐈:
☑Operating Voltage: 5V DC
☑Operating Current: 40mA (MAX)
☑Response Time: <500ms
☑Insulation Resistance: 100M (Min)
☑Output Method:Analog
☑Analog output: 0-4.5V
☑Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
☑Operating Temperature: 5℃~90 ℃
☑Storage Temperature: -10℃~90℃
☑Weight: 30g
☑Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inche
✅ PACKING LIST𝐋𝐈𝐒𝐓:
☑Turbidity sensor adapter x1
☑Turbidity sensor probe x1
☑Turbidity sensor cable x1
☑Gravity analog sensor cable x1
Online kemarin
4.9 (14,6 rb)
± 3 jam pesanan diproses
Ada masalah dengan produk ini?
ULASAN PEMBELI
Ulasan Pilihan
Menampilkan 1 dari 1 ulasan
Lebih dari 1 tahun lalu
Sensor ini saya pakai untuk proyek akhir mata kuliah Sistem Tertanam. Sensornya bekerja dengan baik
