Module mSATA SSD Expansion Board X850

M sata Module Raspberry Pi 3 Model B+ / 3 Model B / 2 Model B / 1 Model B+. Overview The X850 v3.0 expansion board(updated version of V1.3) provides a complete storage solution for raspberry pi. It Supports up to 1TB mSATA solid-state drive (SSD)(Only mSATA interface). User can build a mobile hard disk with a high-speed USB 3.0 connectivity quick file transfer from a PC or a Mac. Furthermore, it supports USB booting from your SSD('reboot' command is supported), USB bus-powered and no extra power for the SSD and so on... Operating System All Raspberry Pi operating system. Features Supports up to 1TB mSATA solid-state drive (SSD) Supports USB booting from your SSD  Ideal storage solution for Raspberry Pi USB 3.1 Gen1 to SATA 6Gb/s bridge controller USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi Quick file transfer with high-speed USB 3.0 connectivity  from a PC or a Mac USB bus-powered LED blue indicator indicates drive status Specially-made USB jumper to connect with Raspberry Pi - no additional cables needed On-board micro-USB power socket to power high capacity SSD ( 2.5Watts)​ Specification Power supply: 5Vdc +/-5% , Powered by Raspberry Pi 5Vdc via micro-USB socket, Additional power supply for SSD        Ports Connectors: USB socket - USB 3.0 type A x1 Micro-USB socket x1 52P Mini PCI-E mSATA slot x1 PCB Size: 85mm x 56mm Note: By connecting with USB connector, X820 V3.0 board is Powered by the Raspberry Pi motherboard. Support 5V power input from the SSD 5V power port on the X850 board at the same time. (you need to get a USB to Micro usb cable by yourself.)(Optional)