NRF24l01 24L01 NRF wireless Cimmunication module for Arduino

komunikasi antar arduino jarak jauh tanpa kabel dengan biaya murmer?
Modul ini jawabanya, NRF24L01+ :D

Modul wireless 2.4GHz ini bekerja dengan level tegangan 3.3V gan. Untuk hasil
maksimal, pastikan agan menggunakan power supply external 3.3V untuk menjaga
stabilitas tegangan. Dengan arduino host nya, NRF24L01 ini menggunakan
komunikasi SPI.

NRF24L01 is a work in the 2.4-2.5GHz worldwide ISM band single-chip transceiver,
wireless transceiver, including: the frequency generator the enhanced
SchockBurstTM mode controller power amplifier crystal amplifier modulator
demodulator output power channel selection and protocol set by the SPI interface
to set a very low current consumption, lower current consumption mode 12.3mA
Power-down mode and standby mode when in transmit mode emission power 6dBm when
current consumption is 9.0mA acceptance model. Ball to open ISM band maximum
0dBm transmit power, license-exempt use.

Fitur:

- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency,
Anti-interference ability, Particularly suitable for industrial control
applications.
- 125 Channels, Multi-point communication and frequency hopping to meet the
communication needs
- Built-in hardware CRC error detection, Multipoint communication address
control.
- Low-power 6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Available software to set the address, only received local Address when output
data(Provide interrupt instruction), can be directly connected to a variety of
microcontrollers, Software programming is very convenient.
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications

Paket :

- 1x NRF24L01 WIRELESS 2.4GHZ DATA TRANSCEIVER MODULE