Hioki 3286-20 Clamp On Power HiTester

Hioki 3286-20 Clamp On Power HiTester Functionality and Safety Packed into a Handheld Unit Use as a single-phase power meter Measure phase on a single-phase line Simple checking of three-phase lines Check power supply fluctuations For harmonic suppression External output of data to PC Printer output to 9442 (optional) Specifications Measurement lines Single-phase/two-wires, Three-phase/three-wires (balanced load only) Measurement items Voltage, current, voltage/current peak, effective/reactive/apparent power(Single-phase or 3-phase), power factor, reactivity, phase angle, frequency, phase detection(3-phase), voltage/current harmonic levels(up to 20th) Measurement ranges Voltage: 150.0 V to 600 V, 3 ranges Current: 200.0 A or 1000 A, 2 ranges Power: 30.00 kW to 1200 kW, 14 combination patterns Note: 3-phase power is calculated and displayed on the basis of a balanced, 50/60 Hz, sine wave input. For apparent power and reactive power, the unit of watts in the above table is replaced by VA and var respectively. Basic accuracy at 50/60 Hz, COS =1 Power/single-phase: 2.3 % rdg. 5 dgt., Power/3-phase: 3.0 % rdg. 10 dgt. (at balanced load) Voltage/Current accuracy Voltage: 1.0 % rdg. 3 dgt., Current: 1.3 % rdg. 3 dgt. (at 45 to 66 Hz) Frequency characteristics 30 Hz to 1 kHz Other functions Phase detection, Record (Max. value/Min. value), Battery capacity display, Data hold, Auto power off, Data output (RS-232C interface by optical insulating coupler) Display update rate NORMAL: approx. 1 time/ sec SLOW: 1 time/ 3-sec HARM meas.: approx. 1 time/ 2-sec Power supply 6LR61 alkaline battery x 1 (continuous operation max. 25 hours) 6F22 manganese battery x 1 (continuous operation max. 10 hours) Dimensions (WxHxD) 62 mm (2.44\) x 260 mm (10.24\) x 39 mm (1.54\) Core jaw diameter: 55 mm (2.17\), 80mm (3.15