Yongnuo Trigger RF 605 / RF605 Wireless Trigger - canon

Deskripsi Yongnuo Trigger RF 605 / RF605 Wireless Trigger Deskripsi Produk Compared with RF-603 II, RF-605 has below function: 1, it has two communication modes RF-602 and RF-603, so you can use RF-605, RF-603 II, RF-602 together. ( but you can #39;t use them in group function together ) 2, it has TX (single transmit) / RX ( single receiver ) / TRX (transmit-receive automatic switch), so you can not only use it as transmitter but also as receiver. 3, it has A/B/C/D/E/F 6 groups ( compatible with YN560-TX ) 4, it has wireless shutter remote control, wireless Flash trigger function. 5, it has Clear LCD screen, shortcut key operation 6, it has 16 channels ( FSK 2.4GHz wireless channel ) Features: 1, Shutter release function a, RF-602 mode, supports wireless shutter release, the transmitter set to #34; TX #34; mode, the receiver set to #34; RX #34; mode. b, RF-603 mode, supports wired / wireless shutter released, all transceivers set to #34; TRX #34; mode. In this mode, you can use RF-605 single transceiver as wired shutter release function. 2, Flash Trigger function a, set the communication mode: Set all the transmitters and receivers to the same communication mode b, Set the transmit-receiver status #34;: Set the transmitter to TX, the receiver sete to RX or TRX. 3, You can use shutter release function and flash trigger function simultaneously. 4, You can use it with Studio Strobe Light with the LS-PC6.35 Type FSK 2.4GHz wireless remote control System Transmitter Distance 100M Channel 16 Channels Release Half-way press, Full-way Press Receiver Interface one is 2.5mm Socket, for shutter release one is standard PC socket for flash Speedlite or studio Strobe Battery Type AAA*2 Receiver Stand-by time about 90 hours in TX status, about 30 hours in TRX ( RX) (Using AAA battery) Size Receiver : 85 x 41 x 35mm (W x H x D) Packing List 2 x RF-605 transceivers 1 x C1or N1 version shutter release cable 1 x C3 or N3