5.0/ 5.0
100% pembeli merasa puas
13 rating • 4 ulasan
5(13)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp4.425.000
Here3+ CAN GNSS GPS Module w/ iStand HEX Here 3+
Rp4.425.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: FLIGHT CONTROLLER - PDB - ACC
#34;Hubungi admin untuk ketersediaan stok dan dapatkan penawaran menarik!!!
Features :
Equipped with STM32H757 high-performance processor in a real-time operating system. The framework developed by Hex provides additional stabilities. Supports future firmware updates.
Cost-efficient high precision and RTK-supported GNSS chip (base station needed for RTK). Positioning accuracy down to centimeter-level in an ideal environment.
Improved dust and water resistance (Not guaranteed to be water-proof under any situation due to the complexity of the operating environment).
Complete built-in set of Inertial Measurement Units (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.
The high data rate, upgradeability, noise immunity, and real-time features benefited from the CAN protocol.
Support from ground control software. Future updates will be available from Mission Planner.
Brand new design with improved visibility on signal LEDs.
iStand Included.
Specifications
-Receiver Type: u-blox high precision GNSS modules (M8P-2)
-Satellite Constellation:GPS L1C/A, GLONASS L1OF, BeiDou B1I
-Positioning accuracy:3D FIX: 2.5 m / RTK: 0.025 m
-Processor: STM32H757
-IMU sensor: ICM42688,RM3100
-Navigation Update Rate:8 hz
-Communication Protocol:DroneCAN 8Mbit/s
-Operating Temperature: -40℃ to 85℃
-Dimension: 68mmx68mmx16mm
-Weight: 51.8g
Includes
-1x HEX Here3+ CAN GNSS GPS Module
-1x Here3+ iStand
Features :
Equipped with STM32H757 high-performance processor in a real-time operating system. The framework developed by Hex provides additional stabilities. Supports future firmware updates.
Cost-efficient high precision and RTK-supported GNSS chip (base station needed for RTK). Positioning accuracy down to centimeter-level in an ideal environment.
Improved dust and water resistance (Not guaranteed to be water-proof under any situation due to the complexity of the operating environment).
Complete built-in set of Inertial Measurement Units (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.
The high data rate, upgradeability, noise immunity, and real-time features benefited from the CAN protocol.
Support from ground control software. Future updates will be available from Mission Planner.
Brand new design with improved visibility on signal LEDs.
iStand Included.
Specifications
-Receiver Type: u-blox high precision GNSS modules (M8P-2)
-Satellite Constellation:GPS L1C/A, GLONASS L1OF, BeiDou B1I
-Positioning accuracy:3D FIX: 2.5 m / RTK: 0.025 m
-Processor: STM32H757
-IMU sensor: ICM42688,RM3100
-Navigation Update Rate:8 hz
-Communication Protocol:DroneCAN 8Mbit/s
-Operating Temperature: -40℃ to 85℃
-Dimension: 68mmx68mmx16mm
-Weight: 51.8g
Includes
-1x HEX Here3+ CAN GNSS GPS Module
-1x Here3+ iStand
Ada masalah dengan produk ini?