50Ml Loctite 277 Thread Locking Ant Anaerobic Adhesive

50ml Loctite 277 Thread Locking Ant Anaerobic Adhesive Kami Menyediakan Barang yang Anda Butuhkan - Item tersedia - Buka 24 jam, kec admin lagi ketiduran - Hub Kami Untuk Menanyakan varian Barang - Pengiriman pat 6-15 hari sai Certification : None Origin : CN(Origin) DIY Supplies : Metalworking Type : Silicone Sealant iscustomized : Yes Model Number : 277 Specification : 50ML color : red Type : high strength, chemical resistan performan Relative density : 1.1 Name: 277 Specification: 50ml color: red Type: high strength, chemical resistan performan Viscosity: 6000/8000mPa.s Avera impedan: 32N.m Avera dama factor: 32N.m Temperature ran: -54/150℃ Speed: 12 hours Recommended acrator: 7649/7471 Relative density: 1.1 It can be used to lock the cylinder head doub-threaded thread. It can be quickly cured, including prying without special surfa treatment. It is recommended to produ bolts with a diameter below 1.5 #34; (36mm). Heating and tools are required for disassembly. Instructions Pretreatment: Can the surfa of the assembly to ensure that there is no residual oil stains, such as engine oil, anti-rust oil, etc., and most surfas have no special pretreatment. For difficult-to-bond substrates, cooperation must be promoted Ant pretreatment. Sizing: Take an appropriate amount of this product and apply it evenly on the surfa of the thread. Glue removal: The spild glue will not solidify, just wipe it off. Disassembly method 1. Disassemb with standard hand tools. 2. In rare cases, the bolts cannot be disassembd at room temperature due to the long mating ngth. The bolts can be heated locally to 250°C and disassembd whi it is hot. 3. Partially heat the HM109566