Clam On Ultrasonic Flow Meter DN15-40 Liquid Tester Flowmeter HLF400

Instrumen bersertifikat kalibrasi dengan kalibrator Krohne OPTIFLUX, Germany

Flow Meter adalah alat untuk mengukur laju cairan. Jenis cairan yang diukur seperti air minum, air limbah, bensin, solar, alkohol, oli dll

Clamp On Ultrasonic Flow Meter ini mengukur untuk pipa ukuran DN15-DN40
- Instalasi dan pemakaian ringkas
- Bisa utk berbagai jenis pipa
- Layar LCD besar


===
Pipe material : Metal /PVC, PP or PVDF rigid plastic pipe
Liquid type: Water/other liquid (Single liquid medium without solid particles or impurities)
Temperature range: 0-75℃ (No freezing on the surface)
Low velocity cut off value (Default by factory): 0.1m/s
Display: LCD 256*128
Response time: 0.5-60s
Accuracy: ±2%, (±1% after calibration)
Data Storage period: 300ms
Memory for data backup: EEPROM (Data storage: over 10 years, data read/write frequency: over 1 million times)
Power and I/O connection: M12 type aviation plug
Output: 4-20mA
Communication: Modbus RS485
Options for output: OCT (pulse output)/ One relay alarm (please contact the factory)
Power supply: 10-24V VDC
Electric power: <3w
Protective circuit: Power reverse connection protection, Power surge protection,

Output short circuit protection, Output surge protection
Enclosure protection class: IP65
Environment temperature: -10 to 60°C (No freezing)
Relative humidity: 35 to 85% RH (No condensation)
Vibration resistance: 10 to 55 Hz

Double amplitude 1.5 mm, 2 hours in each XYZ axis
Impact resistant
100 m/s2 16 ms pulse, 1000 times each for X, Y and Z axis
Main material: Aluminum, Industrial Plastics
Cable length: 2m(standard ), PT1000 sensor standard cable length is 9m