VIBRO METER IPC 704 Signal Conditioner IPC704 244-704-000-042

VIBRO-METER IPC 704 Signal Conditioner IPC704 244-704-000-042

Kondisi Second lepasan panel
Fisik Mulus Oke, Siap pakai ..
Garansi hidup Normal

FEATURES
» From the Vibro-Meter product line
» For CAxxx piezoelectric accelerometers
and CPxxx dynamic pressure sensors
» Configurable high-pass and low-pass filters
» Frequency range: 0.5 Hz to 20 kHz
» Optional integrator to produce a velocity output
» Optional 2-wire current or 3-wire voltage
transmission
» Certified for use in potentially explosive
atmospheres
» A range of installation options are available
IPC704
IECEx
NEPSI KGS
DESCRIPTION
The IPC704 signal conditioner converts the charge-
based signal from a piezoelectric-based transducer
into a current or a voltage signal. This current or volt-
age signal is transmitted to the processing electronics
via a standard 2-wire or 3-wire transmission cable.
The current modulation technique allows transmis-
sion over a distance of up to 1 km. A GSI galvanic
separation unit is required for this configuration.
The electronic circuitry of the IPC704 signal condi-
tioner is incorporated into a moulded aluminium
enclosure. The signal conditioner has configurable
high-pass and low-pass filters and an optional inte-
grator to give a velocity output. Furthermore, RFI fil-
ters protect the input and output against radio-
frequency interference and other electromagnetic
influences.
A range of installation options are available for the
IPC704 signal conditioner, including:
» A polyester enclosure providing environmental
protection against dust, oil and water jets.
» A mounting adaptor allowing the IPC704 signal
conditioner to be mounted on a DIN rail.