Riello Burner Solar Press GW, 1G, 2G, 3G, 4G

Burner seri PRESS GW, 1G, 2G, 3G, 4G adalah burner two stage mencakup jarak tembak 107 hingga 1660 kW dan telah dirancang untuk digunakan pada instalasi sipil dengan dimensi rata-rata, seperti Boiler, Thermal Oil heater dan Oven. PRESS GW 107/178 ÷ 356 kW PRESS 1G 130/190 ÷ 534 kW PRESS 2G 214/356 ÷ 712 kW PRESS 3G 273/534 ÷ 1168 kW PRESS 4G 415/830 ÷ 1660 kW Monoblock forced draught oil burner with two stage operation, fully automatic, made up of: - Air suction circuit lined with sound-proofing material - Fan with forward curve blades with high performance concerning pressure and air delivery - Air damper for air setting - Hydraulic ram for air damper control - Starting motor at 2800 rpm, three-phase 400V with neutral, 50Hz (single-phase, 230V and 50Hz for the PRESS GW model) - Combustion head, that can be set on the basis of required output, fitted with: - stainless steel end cone, resistant to corrosion and high temperatures - ignition electrodes - flame stability disk - Fan pressure test point - Gears pump for high pressure fuel supply, fitted with: - filter - pressure regulator - connections for installing a pressure gauge and vacuometer - internal by-pass for single pipe installation - Valve unit with two delivery oil valves on the output circuit - Photocell for flame detection - Microprocessor-based burner safety control box, with diagnostic function - Slide bars for easier installation and maintenance - Protection filter against radio interference - IP 44 electric protection level. Standard equipment: - 2 flexible pipes for connection to the oil supply network - 2 gaskets for the flexible pipes - 2 nipples for connection to the pump - 4 screws for fixing the burner flange to the boiler - 1 thermal screen - Instruction handbook for installation, use and maintenance - Spare parts catalogue. Hubungi Kami Mitra Boiler : 0895328702165