LCD SHIELD FOR ARDUINO NOKIA 6100 DISPLAY COLOR IMAGE BOARD LINKSPRITE

Color Image LCD Shield for Nokia 6100 Arduino Display Board features: this is a shield board with nokia 6100 LCD. This 128x128 mini color LCD is a perfect match for portable applications. It is designed to repalce the screen in a damaged phone. so the connector is not designed for multiple attachments / detachments. please be gentle and handle properly. This cheap LCD is equipped with a powerful white LED backlight and a relatively simple serial interface. this is a 9-bit interface, so be careful. but we were able to get the LCD up and running on the LPC2138 with a few hours worth of work. Frame Dimensions: 1.35x1.58 #34; Active Display Dimensions: 1.2 #34;x 1.2 #34; specification LCD Logic - 3.3V 2-3mA LED Backlight - 7V 40-50mA (very bright) Full 4,096 Display Colors using the Philips PCF8833 Controller tutorial interface Epson ControllerDatasheet SFE Eagle Libraryhas this section! Theholy forum grail posts for this type of Nokia LCD example LCD Control Pixel example of Parallax Stamp BS2 Code example ATMega32 Code sample ARM SAM7-P64 Code example 3D Graphics projecton PIC example ATMega644 / 128/32/16 code example of the Gumstix Interface example PIC 16F87x codefor CCS Compiler example PIC 18F4550 USB Example 4096 Color Control example Linux Driver example Image Converter Bit Converter maps Embed Example Pin Out (using the numbering shown on the connector screen): VCC-Digital (3.3 V) REPEAT SDATA SCK CS VCC-Display (3.3 V) N / C GND GND LED LED V + (6-7 V)