Atur jumlah dan catatan
Stok Total: 450
Subtotal
Rp709.000
AXP90 Steering Buckle Improved Version 12CM Fan Bracket Backplane Base Cooling Improved Air Duct
Rp709.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Origin : Mainland China
Use : Window
Hign-concerned Chemical : None
Limin AXP90 radiator AMD steering buckle is to turn the installation direction of the radiator 90 degrees
The fixing method is changed from screwing nuts on the back of the original motherboard to screwing, which is more suitable for the installation of some cases with small space on the back of the motherboard.
special reminder:
1. This clip only supports AMD AM4 interface, not those old-fashioned interfaces such as AM3 FM1 FM2
2. This fastener only supports the old version of AXP90, not the new version of AXP90
3. The installation of AXP90 may conflict with the MOS on individual motherboards. It is recommended to compare AXP90 on the actual motherboard first, and then buy it if there is no conflict.
4. Some buyers asked, can the pay-to-order fastener be used on the backplane of the motherboard? In principle, no, unless you have a way to knock off the 4 studs on the built-in backplane, but if the operation is not good, it is easy to knock the backplane out of shape. Once it is deformed, the meaning of the backplane will be lost. If you separate the studs, if there are protruding burrs left at the joint, it is easy to scratch the motherboard during installation. Of course, if you have the relevant tools and have a strong hands-on ability, it is another matter.
The difference between the new version and the old version of AXP90:
Mainly depends on the buckle, the old version of the official buckle is bent and the screw is riveted and cannot be taken off, while the new version of the buckle is flat and the screw can be unscrewed (as shown in the fifth main picture). In addition, in terms of heat dissipation capacity, for example, although the height of the heat dissipation body of the old version of AXP90R and the new version of AXP90-X47 is the same, the length and width of the old version of the heat sink is 97*89mm, the length and width of the new version of the heat sink is 94*84mm, the old version of AXP90 heat dissipation The body is larger than the new version, and the heat dissipation capacity will be slightly better.
In addition: theof the AXP90 fan bracket is the matchingin this link. If you want to buy it separately, please enter theto take another link (19.3 yuan). The detailed introduction and installation diagram of the 12 cm fan bracket are in the link of the special fan bracket, which is omitted here.
Use : Window
Hign-concerned Chemical : None
Limin AXP90 radiator AMD steering buckle is to turn the installation direction of the radiator 90 degrees
The fixing method is changed from screwing nuts on the back of the original motherboard to screwing, which is more suitable for the installation of some cases with small space on the back of the motherboard.
special reminder:
1. This clip only supports AMD AM4 interface, not those old-fashioned interfaces such as AM3 FM1 FM2
2. This fastener only supports the old version of AXP90, not the new version of AXP90
3. The installation of AXP90 may conflict with the MOS on individual motherboards. It is recommended to compare AXP90 on the actual motherboard first, and then buy it if there is no conflict.
4. Some buyers asked, can the pay-to-order fastener be used on the backplane of the motherboard? In principle, no, unless you have a way to knock off the 4 studs on the built-in backplane, but if the operation is not good, it is easy to knock the backplane out of shape. Once it is deformed, the meaning of the backplane will be lost. If you separate the studs, if there are protruding burrs left at the joint, it is easy to scratch the motherboard during installation. Of course, if you have the relevant tools and have a strong hands-on ability, it is another matter.
The difference between the new version and the old version of AXP90:
Mainly depends on the buckle, the old version of the official buckle is bent and the screw is riveted and cannot be taken off, while the new version of the buckle is flat and the screw can be unscrewed (as shown in the fifth main picture). In addition, in terms of heat dissipation capacity, for example, although the height of the heat dissipation body of the old version of AXP90R and the new version of AXP90-X47 is the same, the length and width of the old version of the heat sink is 97*89mm, the length and width of the new version of the heat sink is 94*84mm, the old version of AXP90 heat dissipation The body is larger than the new version, and the heat dissipation capacity will be slightly better.
In addition: theof the AXP90 fan bracket is the matchingin this link. If you want to buy it separately, please enter theto take another link (19.3 yuan). The detailed introduction and installation diagram of the 12 cm fan bracket are in the link of the special fan bracket, which is omitted here.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan