TRENDnet TC-NT2 Network Cable Tester LAN Tester Kabel LAN TREND net

Local and Remote Testing A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Cables and Ports Accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports Cable Distance Tests over cables lengths of up to 300 meters (984 ft.) Identifies proper, severed, short circuit, and cross connected pins - RJ-11/RJ-12/RJ-45 - EIA/TIA-356A/568A/568B - Token ring cables Compatible Cables : - Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e - Coax cable - USB and 1394 cable (with TC-NTUF) Transmitter Unit Interface : - 2 x test ports - Manual test button - Auto test button - Power/tone switch - LED indicators Receiver Unit Interface : - Test port - LED indicators Tone Frequency : - 600 - 800 Hz Special Features : - Test grounding of shielded (screened) cable - Identifies proper, severed, short circuit, and cross connected pins - Build-in tone generator for tracing cable with standard Tone Probe (TC-TP1) - Test USB and IEEE 1394 cables with optional adapters (TC-NTUF not included) Power Source : - Transmitter: 9 V DC battery (not included) - Receiver: powered by master transmitter via connected cable Operating Temperature : - 0 - 50°C (32 - 122°F) Operating Humidity : - Max. 95% non-condensing Certifications : - CE Dimensions : - Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.) - Receiver: 117 x 32 x 27 mm (4.6 x 1.3 x 1.1 in.) Weight : - Receiver: 44 g (1.6 oz.)