BENRO Professional Video Tripod Kit C373FBS8 PRO

BENRO Professional Video Tripod Kit C373FBS8Pro

S8Pro Fluid Head :

17.6 lb payload
75mm flat base with a 3/8"-16 thread
Can also be mounted directly on most sliders, jibs, and monopods
7+0 steps of counterbalance
Continuous pan and tilt drag
Independent pan and tilt locks
+90/-75° tilt range
360° pan range
Made of magnesium and aluminum
Rosette adapters on the left and right side for attaching the included pan bar
Sliding camera plate with safety lock
1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
Two 3/8"-16 threaded holes for accessories


C373F Tripod :

75mm bowl tripod with a 75mm half-ball adapter
Maximum height of 64" with the S8Pro attached
Low-angle minimum height of 12.4"
Single-tube legs independently adjustable into three positions
Spiked and rubber feet
Flip leg locks
Carbon fiber construction


Specification :

Camera Plate Features : Sliding Balance Plate
Camera Mounting Screw
1 x 1/4"-20 Male
1 x 3/8"-16 Male
Safety Lock : Yes
Base Mount : 3/8"-16 Female
Counter Balance : Incremental 7-Step Plus 0
Pan Handle Fittings : 2 x Rosette
Bubble Level : 1 x Illuminated
Accessory Mounting : 2 x 3/8"-16 Female Thread
Base Diameter : 2.95" / 75 mm
Drag Control
Pan: Continuous
Tilt: Continuous
Drag Type : Fluid
Vertical Tilt : +90° to -75°
Panning Range : 360°
Independent Pan Lock : Yes
Independent Tilt Lock : Yes
Leg Lock Type : Flip Lock
Leg Positions : 3 Positions
Leg Sections : 3
Feet Features : Rubber, Spiked
Spreader : None
Load Capacity : 17.6 lb / 7.98 kg
Maximum Working Height : 64" / 162.56 cm
Minimum Working Height : 12.4" / 31.50 cm
Materials : Aluminum, Carbon Fiber, Magnesium