Digital Flow Meter Manual Instruction Measuring Flow Sensor LCD Ready

Digital Flow Meter Manual Instruction

1.Keypaddefinition
Keypadfrom the left to the right, respectively, the keyset "SET", the keyplus "+", the key minus"-".
2.Display manual
1)Temperature:
The temperature range is -99 ~ 999 , the unit C is the Celsius temperature, and F is the Fahrenheit temperature.
The temperature unit can be switched by pressing the "+" Up key.
2 ).Use time / flowratedisplay
HiHuiLai flowmeter mode will automatically jump to the flow rate displayif there is water flowing.
Whenno water flowing, show the total timeDAY(only in water pressure mode show timeDAY).
The total time unit DAY is days, HRS ishours, time units can press the "+" key to switch.
The flow rate unit LPM means "liters / minute", GPM stands for "gallons per minute", and can be switched by pressing the "-" key.
The current interface number is displayed under other interfaces: 00 indicates the K value setting interface (K SETING).
3) Power noted:
The power prompt icon will be displayed when the battery is low and flashing.Reminder the user to replace the battery.
In the case of adequate power it is not displayed.
4)Faucet animation (flowmeter only)
When detectedwater is flowing, the faucet animation will begin to show water droplets
5) Total water consumption, flow rate display

Flow sensor meter LCD display controller

6)K SETTING
K value setting characters will be displayed when entering the K value setting interface.
7)Total flow character (TOTAL) (flowmeter only)
When the system is operating in the flowmeter mode, the total flow character is displayed in the main interface.
3 .Settings and interface description
1)The main interface and settingsunderthe main interface
(1) The main interface will display the characters TOTAL, total water consumption, temperature, total use time.
(2)Press the "SET" key in the main interface