Atur jumlah dan catatan
Stok Total: Sisa 9
Subtotal
Rp2.650.000
PROGRAMMER IC programmer ic Genius G540 USB Universal Programmer Ready
Rp2.650.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Hardware
On_ (means connect the hardwar to PC):
Click the button SELE on the toolbar .Select Device lass,Manufactory,Device according to the target device.
2Load data:
If your datas are at the data file, click the button Load on the toolbar . Locate to your data file then open it .
Note: Must select the formation to match the formation of the
your datas are in the sample device,please place the sample device into the locking socket then click the button Read on the operation read the device data to the buffer.
3Set Encryption or Configuration value.
Click the button Config Encrypt SET. to set Encryption or Configuration parameter according to the device attribute.
Note: The seting values take effect after Encrypt operation
Some of device may has not the encrypting feature.
4Set Programming Operation Sequence
There is a default Programming Operation Sequence for each device selection . Generally it is not necessarly to you want to chang it,you can click main menu SetSet Programming Sequence .
5Place the target device on the locking socket
6Click the on the toolbar, the Programming Operation Sequence be set at step 4 are automaticaly orderly executing
7Replay 5, 6, to program anather device.
Click the button SELE on the toolbar .Select Device lass,Manufactory,Device according to the target device.
2Load data:
If your datas are at the data file, click the button Load on the toolbar . Locate to your data file then open it .
Note: Must select the formation to match the formation of the
your datas are in the sample device,please place the sample device into the locking socket then click the button Read on the operation read the device data to the buffer.
3Set Encryption or Configuration value.
Click the button Config Encrypt SET. to set Encryption or Configuration parameter according to the device attribute.
Note: The seting values take effect after Encrypt operation
Some of device may has not the encrypting feature.
4Set Programming Operation Sequence
There is a default Programming Operation Sequence for each device selection . Generally it is not necessarly to you want to chang it,you can click main menu SetSet Programming Sequence .
5Place the target device on the locking socket
6Click the on the toolbar, the Programming Operation Sequence be set at step 4 are automaticaly orderly executing
7Replay 5, 6, to program anather device.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan