Analog Oscilloscope 20MHz Atten AT7328

Dual Channel 20 MHz Analog Oscilloscope Spesifikasi: - Sensitivitas tegangan hingga 5mV-5V/DIV pada setiap channel. - 0.2s/div to 0.5s/div Time Base(Uncal upto 20ns) - Tegangan input: 400 Vpp (Max @10x probe) - 8 x 10 cm Display Internal Graticule - Trigger source: CH1, CH2, Line, EXT - Trigger mode: AUTO, NORM, TV-V, TV-H - TV signal synchronous function, TV Triggering Frame (V) amp; Line (H) - Dilengkapi fungsi DUAL amp; ADD untuk kedua sinyal input - Dilengkapi output untuk tegangan kalibrasi sebesar 2 Vpp/1 kHz - Dilengkapi tombol pengatur intensitas cahaya amp; fokus layar VERTICAL AXIS Sensitivity 5mV~5V/DIV, 10 steps in 1-2-5 sequence (X5 MAG:1mV/DIV) Sensitivity accuracy 3% (5MAG: 5%) Vernier vertical sensitivity continuously variable to 1/2.5 or less of panel-indicated value Frequency bandwidth DC-20MHz (5MAG:DC-7MHz) DC-40MHz (5MAG:DC-15MHz) AC coupling Low limit frequency 10Hz. (With reference to 100KHz,8DIV.Frequency response with-3dB) Rise time Approx.17.5Ns (5MAG:Approx.50Ns) / 9.5nS (X5MAG: Approx.25nS) Input impedance Approx. 1M ohm//Approx. 25pF Square wave characteristics Overshoot: 5%(At 10Mv/DIV range) other distortions and other ranges: 5% added to the above value DC balance shift: 5mV~5V/DIV; 0.5 DIV, 1mV~2mV/DIV2.0DIV Linearity: lt; 0.1DIV of amplitude change when waveform of 2 DIV at graticule center is moved vertically. Vertical modes CH1 single channel CH2 single channel DUAL CH1 and CH2 are displayed ALT or CHOP selectable at any sweep rate. ADD CH1+CH2 algebraic addition Chopping repetition frequency Approx.250KHz Input coupling AC, GND , DC Maximum input