ATA PTX5 PTX-5 Garage Door Remote Control TrioCode GDO PTX-5v1

Model Number : ATA PTX5 Remote Control Brand Name : Scimagic-RC Origin : Mainland China Certification : CE Name : ATA PTX-5 V1 garage remote control Frequency : 433MHz / 433.92MHz Code : Rolling code Button : 4 Battery : Include Battery 1-20pcs ATA PTX5 Garage Door Opener ATA PTX-5 PTX5v1 PTX5v2 Remote Control GDO 7V3/8V3/9V2/9V3/10V1 433.92mhz Rolling Code Suits remote models: PTX5 PTX-5 Compatibility: DCB-05 (Dual Gate Controller) GDO-6v3 (EasyRoller) GDO-6v4 (EasyRoller) GDO-7v2 (SecuraLift) GDO-7v3 (SecuraLift) GDO-8v3 (Shed Master) GDO-9v2 (SecuraLift) GDO-9v2 (Enduro) GDO-9v3 (Dominator) GDO-9v3 (Dynamo) GDO-10v1 (Toro) GDO-11v1 (Ero) NES-24v1 (NeoSlider) SGO-1 (Elite) Also suitable for Dominator opener GDO-7v2, Dominator GDO9v2, Dominator GDO9v3, GDO11 Included * Remote Control * Battery * Keychain * English Manual Programming transmitters to receiver The remote control is the same function as your original should programming with original receiver according to your original Manual when you get it. 1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover, or on the back of the motor. 2. Press the Learn / Code Set button once, then let go. A light should illuminate. 3. Press the desired transmitter button once, and the light will go out. 4. Press the remote again the the light will flash on the motor and then go out, signifying the remote has been coded. 5. Test the operation of the remote. Feature 1. Free Battery 2. Free Coding Instructions 3. Free Keychain 4. Heavy Duty Design 5. In-built Battery Include * Remote Control * Battery * Keychain * English Manual