5.0/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 35
Subtotal
Rp35.000
Lcd Nokia 5110 Module For Arduino / Raspberry Pi
Rp35.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ARDUINO
Modul LCD Nokia 5110 adalah sebuah modul grafis dengan display monokrom 84 x 48 pixel yang diambil dari screen handphone Nokia 5110. Modul ini memiliki fitur cahaya LED backlight berwarna biru.
Spesifikasi :
1. 84 x 84 dot matrix LCD, can show 4 lines of characters
3. Can use the conductive glue to connect the module with the printed board, without connecting cable. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
4. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
5. Low power supply,the working current in normal situation is lower than 200uA,and has power-down mode
Connection:
RST=reset
CE=chip selection
DC=data/commands choice
DIN=serial data line
CLK=serial Clock Speed
3.3V=VCC
LIGHT=backlight control terminal
GND=power negative
Spesifikasi :
1. 84 x 84 dot matrix LCD, can show 4 lines of characters
3. Can use the conductive glue to connect the module with the printed board, without connecting cable. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
4. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
5. Low power supply,the working current in normal situation is lower than 200uA,and has power-down mode
Connection:
RST=reset
CE=chip selection
DC=data/commands choice
DIN=serial data line
CLK=serial Clock Speed
3.3V=VCC
LIGHT=backlight control terminal
GND=power negative
Ada masalah dengan produk ini?