5.0/ 5.0
98% pembeli merasa puas
94 rating • 22 ulasan
5(91)96.81%
4(2)2.13%
3(1)1.06%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 56
Subtotal
Rp198.000
Mach3 USB DIY CNC controller interface MACH 3 Breakout Board 4 Axis
Rp198.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Komponen elektronika
Mach3 4 Axis USB CNC Controller card 100KHz
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
11. 1 status LED, indicate connection status on the board
Package
1x CNC controller mach3
1x USB cable
1x CD Disk
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
11. 1 status LED, indicate connection status on the board
Package
1x CNC controller mach3
1x USB cable
1x CD Disk
Ada masalah dengan produk ini?