NodeMCU V3 ESP8266 ESP12 CH340 IOT wireless Arduino

Welcome to Centralab

Spesifikasi
- Communication interface voltage : 3.3V.
- Antenna type : Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0 : 1 channel ADC
- Power input : 4.5V ~ 9V (10VMAX), USB-powered
- Current : continuous transmission : 70mA (200mA MAX), Standby : 200uA
- Transfer rate : 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature : -40 Deg ~ + 125 Deg
- Drive Type : Dual high-power H-bridge driver
- ESP8266 has IO Pin
- Don't need to download resetting
- A great set of tools to develop ESP8266
- Flash size : 4MByte

Isi Paket :
1 x NodeMCU v3 ESP8266

Untuk pengiriman instant dan sameday hubungi kami terlebih dahulu :))

Thank You #Centralab