york audio match esd v2 cabinet simulator IR

The York Audio MTCH 212 ESD-V2 is based on a Matchless ESD 2x12 cabinet loaded with Celestion M25 and H30 speakers custom made for Matchless amps. This cabinet was acquired and put through rigorous A/B testing to see how it compared to our other ESD cabinet. This was the clear winner that sounded better, felt more #34;alive, #34; and was more inspiring to play through. The tone has rich midrange and warm low-mids with a smooth top end that chimes without being abrasive. Equally at home with single coil pickups, humbuckers, and semi-hollowbody guitars, this cabinet excels at clean, edge of breakup, and mid gain tones that truly sing. Captured with twelve vintage and modern microphones through top of the line outboard equipment, this Cab Pack boasts 115 single mic shots on each speaker along with 11 H30 Mixes, 11 M25 Mixes, and 11 H30-M25 speaker blend Mixes for a total of 263 IRs! The intuitive folder structure makes it easy to navigate your way to getting great tones that suit your individual tastes and needs with minimal effort. Microphones used in this Cab Pack Dynamic: 57m - Based on a modern Shure SM57 57v - Based on a vintage Shure Unidyne III SM57 58 - Based on a Shure SM58 SM7 - Based on a Shure SM7b 421m - Based on a modern Sennheiser MD421 421v - Based on a vintage Sennheiser MD421 906 - Based on a Sennheiser e906 Ribbon: 121- Based on a Royer R-121 160 - Based on a Beyerdynamic M160 313 - Based on a Shure KSM313 Condenser: T49 - Based on a Neumann TLM 49 U47 - Based on a Telefunken U47 Ambient: ROOM - Captured with a TelefunkenU47 REAR - Captured with a Telefunken U47 SIDE - Captured with a Telefunken U47 All products have been tested with Fractal Audio Systems, Line 6, Strymon, and Kemper hardware, as well as DAW plug-ins to ensure seamless integration with your digital modeling units. York Audio products are licensed, not owned. It is illegal to share York Audio products, so please support our brand and ensure mor