Atur jumlah dan catatan
Stok Total: Sisa 2
harga sebelum diskonRp1.200.000
Subtotal
Rp1.080.000
CT716 Conversion case SKX007/009/SRPD to Panerai
Rp1.080.000
diskon 10%
Harga sebelum diskon Rp1.200.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Cases
Material – HQ Stainless Steel 316L surgical grade
Description – SKX007 to Panerai inspired look CONVERSION CASE. Drilled through 22mm lugs** – Tested to 300M. Compatible with all SKX007 OEM parts and the majority of aftermarket parts***
Dimensions – Diameter 41.5mm (without crown) – Lugs tip to tip 49.5mm
What you get!
1 x Case
2 x 22mm Fat Spring Bars
1 x Crystal Gasket – fitted
1 x Case Back Gasket
CASE BACKS IMPORTANT NOTE – CT231 or CT239B with built in spacer are for use with NH35/36 movements with thinner grey movement holder – no need to do anything the movement can drop straight in. If you are using a movement with the thicker black spacer you MUST use an oem case back or our CT200 or CT239A
**Drilled Through Lugs for easy bracelet and strap changes reducing the risk of scratching/damaging your case
*** We can pretty much guarantee 100% our CT manufactured parts and Seiko OEM SKX007 parts will fit. Most reputable aftermarket manufacturers parts will also be ok, but we cannot 100% guarantee this as in some instance’s tolerance build up/variation exists that can be problematic – bezels being a particular area that can be tricky. We now have many different SKX007 bezels in the hope that you may consider purchasing your bezel from us
Finish – Hi Polish/Brushed
Water Resistance
This case was tested to 300M during development and subsequent testing of actual production cases – no failures were recorded.
Suitability
A great basis for a custom build – a mass of SKX007 aftermarket mod parts are available for you to build your DREAM MOD
Additional info – Ideal for building a complete custom 1 off unique dream mod – limitless possibilities with 1000s of SKX007 mod parts readily available worldwide.
Description – SKX007 to Panerai inspired look CONVERSION CASE. Drilled through 22mm lugs** – Tested to 300M. Compatible with all SKX007 OEM parts and the majority of aftermarket parts***
Dimensions – Diameter 41.5mm (without crown) – Lugs tip to tip 49.5mm
What you get!
1 x Case
2 x 22mm Fat Spring Bars
1 x Crystal Gasket – fitted
1 x Case Back Gasket
CASE BACKS IMPORTANT NOTE – CT231 or CT239B with built in spacer are for use with NH35/36 movements with thinner grey movement holder – no need to do anything the movement can drop straight in. If you are using a movement with the thicker black spacer you MUST use an oem case back or our CT200 or CT239A
**Drilled Through Lugs for easy bracelet and strap changes reducing the risk of scratching/damaging your case
*** We can pretty much guarantee 100% our CT manufactured parts and Seiko OEM SKX007 parts will fit. Most reputable aftermarket manufacturers parts will also be ok, but we cannot 100% guarantee this as in some instance’s tolerance build up/variation exists that can be problematic – bezels being a particular area that can be tricky. We now have many different SKX007 bezels in the hope that you may consider purchasing your bezel from us
Finish – Hi Polish/Brushed
Water Resistance
This case was tested to 300M during development and subsequent testing of actual production cases – no failures were recorded.
Suitability
A great basis for a custom build – a mass of SKX007 aftermarket mod parts are available for you to build your DREAM MOD
Additional info – Ideal for building a complete custom 1 off unique dream mod – limitless possibilities with 1000s of SKX007 mod parts readily available worldwide.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan