PWM DC Brushless Motor Controller 6 To 30V BLDC Speed Controller

PWM DC Brushless Motor Controller 6 To 30V BLDC Speed Controller Reverse Switch Use In DC Motor Controller

Brushless motor controller introduction

1. Voltage: 6V To 30V

2. Power : 90W

3. Maximum current : 3A

4. Ways to adjust the speed: stepless speed regulation

5. Frequency switching: The default position is 20khz (that is, 2 needles near the terminal block), 2 needles near the adjustment speed knob are 2khz, we will send you 20khz by default.

6. Function: Rotate clockwise or counterclockwise; stepless adjustment speed; brake function, but the motor itself must have brake function

7. This controller is suitable for 3-phase brushless motor PWM speed regulation of some built-in drives, brushless fan speed regulation, etc.

8. Because the brushless motor itself has FG signal output, but this controller does not have FG signal speed measurement function, so please do not connect the motor signal output line to this controller. Thanks

9. Do not connect the positive and negative terminals of the DC power supply incorrectly, otherwise the controller will burn out.

The size is for reference only,the measurement will be slightly different,please pay attention before buying

Function introduction of each part

1. Forward and reverse toggle button

2. Emergency stop button

3. Acceleration and deceleration adjustment knob

4. Connect the speed control line PWM

5. The brake wire of the DC brushless motor is connected here.

6. CW or CCW, line connection for forward and reverse switching

7. Connect the positive pole of the motor

8. Connect the negative pole of the motor

9. Connect the negative pole of the DC power supply

10. Connect the positive pole of the DC power supply

The following is the picture of the controller