LabJack U3-LV Multifunction DAQ with USB / Data Akusisi / Aquisition

LabJack U3-LV Multifunction DAQ with USB OVERVIEW: USB DAQ device with 16 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 20 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers. FEATURES: ◆ 16 Flexible I/O (Digital Input, Digital Output, or Analog Input) ◆ Up to 2 Timers (Pulse Timing, PWM Output, Quadrature Input, ...) ◆ Up to 2 Counters (32-Bits Each) ◆ 4 Additional Digital I/O ◆ Up to 16 12-bit Analog Inputs (0-2.4 V or 0-3.6 V, SE or Diff.) ◆ 2 Analog Outputs (10-Bit, 0-5 volts) ◆ Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only) ◆ Supports Software or Hardware Timed Acquisition ◆ Maximum Input Stream Rate of 2.5-50 kHz (Depending on Resolution) ◆ Capable of Command/Response Times Less Than 1 Millisecond ◆ Built-In Screw Terminals for Some Signals ◆ OEM Version Available ◆ USB 2.0/1.1 Full Speed Interface ◆ Powered by USB Cable ◆ Drivers Available for Windows, Linux, Mac and Pocket PC ◆ Examples Available for C/C++, VB, LabVIEW, Java, and More ◆ Includes USB Cable and Screwdriver ◆ Free Firmware Upgrades ◆ Money Back Guarantee ◆ Enclosure Size Approximately 3 #34; x 4.5 #34; x 1.2 #34; (75mm x 115mm x 30mm) ◆ Rated for Industrial Temperature Range (-40° to +85°C) WHAT #39;S IN THE BOX: ◆ U3-LV unit itself in red enclosure ◆ USB cable (6 ft / 1.8 m) ◆ Screwdriver No software CD included. Download the software from labjack•com