Horn Strobe System Sensor Notifier SYS-HS

Features
• Mounting plate included for compatibility with a wide range of
back box sizes
• Three field selectable candela settings: 15, 75, and 115
• Easy to use rotary dials for selection of candela and horn settings
• Built in synchronization feature keeps strobes in sync for
up to 30 minutes
• Strobes Listed to UL 1638; Horns Listed to UL 464
• Horn settings on the horn strobe model include high and low
volume, continuous or temporal 3 tone
• Round trim ring available for ceiling mount applications
• Universal Fire symbol is language independent
• Trim plate allows mini horn to mount to a variety of back boxes
and fit aesthetically with the horn strobe and strobe

The System Sensor line of notification devices offers the most
flexibile and easy-to-use line of horns, strobes, and horn strobes in
the industry. With white and red housing, universal fire symbol and
a ceiling mount accessory available these devices can meet virtually
any application. They also mount to a wide variety of back box sizes
to offer the most flexibility in installation.
This line of devices features a wide variety of features that
simplifies installations. The mounting plate allows the devices to
be compatible with a wide range of back box sizes. Settings for the
strobe and horn are done using easy to set rotary switches on the
back of the device. Synchronization is achieved without the use of
additional modules; when powered with a filtered DC source, the
strobe portion is capable of self synchronization for 30 minutes per
NFPA 72.
Three candela options are available for the strobe when it works on
24 volts or full wave rectified power. Only 15 candela is available
for strobe when it works on 12 volts. On the horn strobe model, high
and low volume are options for the horn as well as a continuous tone
or temporal 3 output. The mini horn model has a continuous tone
output and one volume setting.