5.0/ 5.0
100% pembeli merasa puas
3 rating • 2 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Dia. 4,0mm
Atur jumlah dan catatan
Stok: 50
Subtotal
Rp298.704
Kawat Las GOUGING NIKKO NSG - For Gouging all Metals - Dia. 4,0mm
Rp298.704
Pilih ukuran: Dia. 4,0mm
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: KAWAT LAS
Kawat Las GOUGING NIKKO NSG adalah kawat las khusus yang digunakan untuk gouging dan grooving segala jenis logsm termasuk cast iron, stainless steel, cooper dan aluminium. Dapat digunakan untuk membuat kampuh las pada bagian yang retak serta membuang bekas logam yang lama.
Spesifikasi : -
Klasifikasi : -
Diameter (mm) : 3,2 ; 4,0
Berat 1 Pack : 4 Kg
Berat 1 Dus : 16 Kg
Tensile Strength {N/mm2) : -
0,2 % Proof Stres (N/mm2) : -
Yield Strenght (kgf/mm2) : -
Elongation on 4d (%) : -
Welding Ampere AC / DC+ (A) : 150 - 200
Posisi Las :
Application And Material Gouged : Gouging mild steel, stainless steel, cast irons, nickel based alloys. To assist weld preparation or back gouging when welding from both sides.
Removal of worn hard facing deposits. Stress relieving grooves in cast irons etc. Removing weld defect, cracks etc.
Gouge Appearance :
The gouge is smooth and internally clean.
The dross covers only the groove edges and the gouge itself.
May be welded directly by manual electrodes if TIG and MIG is to be used.
The gouge should be pre-ground.
Other Data : Electrodes that have become damp should be re-dried at 100 - 153 derajat C for 30 minutes
Untuk pemesanan banyak dapat menghubungi :
08176915938 (Wa/Tlp/Sms)
Gunakan Diskusi produk untuk tanya jawab
Terima Kasih
Spesifikasi : -
Klasifikasi : -
Diameter (mm) : 3,2 ; 4,0
Berat 1 Pack : 4 Kg
Berat 1 Dus : 16 Kg
Tensile Strength {N/mm2) : -
0,2 % Proof Stres (N/mm2) : -
Yield Strenght (kgf/mm2) : -
Elongation on 4d (%) : -
Welding Ampere AC / DC+ (A) : 150 - 200
Posisi Las :
Application And Material Gouged : Gouging mild steel, stainless steel, cast irons, nickel based alloys. To assist weld preparation or back gouging when welding from both sides.
Removal of worn hard facing deposits. Stress relieving grooves in cast irons etc. Removing weld defect, cracks etc.
Gouge Appearance :
The gouge is smooth and internally clean.
The dross covers only the groove edges and the gouge itself.
May be welded directly by manual electrodes if TIG and MIG is to be used.
The gouge should be pre-ground.
Other Data : Electrodes that have become damp should be re-dried at 100 - 153 derajat C for 30 minutes
Untuk pemesanan banyak dapat menghubungi :
08176915938 (Wa/Tlp/Sms)
Gunakan Diskusi produk untuk tanya jawab
Terima Kasih
Ada masalah dengan produk ini?