HANTEK DSO4204B DIGITAL OSCILLOSCOPE DSO 4 CHANNEL 200MHZ 1GSA/S

MET-0079 ======== Spesifikasi: ======== -Bandwidth: 200MHz -Rise Time (BNC, typical):≤1.8ns -Sample Rate Range:1GS/s -Channel: 4 Channel+EXT -Input Coupling: DC,AC or GND -Input Impedance: 1MΩ±2%,20pF±3 pF -Probe Attenuation: 1X,10X -Supported Probe Attenuation Factors: 1X,10X,100X,1000X -Overvoltage Category: 300V CAT II -Maximum Input Voltage: 300VRMS (10X) -Record Length:Max. 64K samples per single-channel; Max. 32K samples per dual-channel (4K, 32K optional) -Horizontal Scale (s/div): 2ns/div~100s/div, 1~2~5 sequence -Sample Rate and Delay Time Accuracy: ±50ppm -Delta Time Measurement Accuracy (Full Bandwidth): -Single-shot, Normal mode: ±(1 sample interval+100ppm*reading+0.6ns) gt;16 averages:±(1 sample interval+100ppm*reading + 0.4ns) -Sample interval = s/div ÷ 200 -AD Converter: 8-bit resolution,each channel sampled simultaneously -Vertical Scale (Probe 1X): 500μV/div~10V/div at input BNC -Position Range: 500μV/div~20mV/div, ±400mV; 50mV/div~200mV/div, ±2V; 500mV/div~2V/div, ±40V; 5V/div~10V/div, ±50V-Selectable Analog Bandwidth Limit: 20MHz (typical) -Low Frequency Response (-3db): ≤10Hz at BNCDC Gain Accuracy: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 500μV/div -Acquisition Rate (typical): Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement) -Trigger Mode: Auto and Normal -Trigger Level: CH1~CH4: ±4 divisions from center of screen; EXT:0~3.3V -Holdoff Range: 20ns~10s -Trigger Level Accuracy: CH1~CH4:0.2div*volts/div within ±4 divisions from center of screen; EXT:± (6% of setting + 40mV) -Trigger Type: Edge,Pulse Width,Video,Slope,Overtime,Window,Pattern,Interval,Under Amp -Decode Type (Standard): I2C,SPI,UART,LIN,CAN -Cursors: Voltage difference between cursors: Delta V -Time difference between cursors: Delta T Paket : ===== 1 X HANTEK DSO4204B DIGITAL OSCILLOSCOPE DSO 4 CHANNEL 200MHZ 1GSA/S +  ACCESSORIES