5.0/ 5.0
99% pembeli merasa puas
317 rating • 50 ulasan
5(311)98.11%
4(3)0.95%
3(1)0.32%
2(0)0%
1(2)0.63%
Diambil dari Tokopedia & TikTok Shop by TokopediaAtur jumlah dan catatan
Stok Total: 768
Subtotal
Rp38.900
NODEMCU LUA WIFI V3 4MB CH340 FLASH ESP8266 ESP12 + KABEL MICRO USB
Rp38.900
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ESP-NODMCU-WIFI-IOT
ESP-0043
========
Deskripsi :
=================================
Hallo,,, !!! slamat datang di lapak/toko kita "CNC STORE BANDUNG" :-)
Board LOLIN ini ukurannya lebih besar dari yang versi DOIT!
Bord ini merupakan board yang dapai kita pakai untuk berbagai projek IOT, Board ini merupakan versi ke-3 (V3) dimana lebih setabil dari versi-versi sebelumnya tentunya.
Untuk pemrogramannya sendiri tentu bisa kita perogram melalui aplikasi IDE arduino. Tutorialnya seabrek di google gan,, :-)
Spesifikasi :
=================================
- Uses FT232 instead of CP2102.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength FT232 for superior stability on all supported platforms.
- Communication interface voltage: 3.3V.
- Antenna type: Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0: 1 channel ADC
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature: -40 ~ + 125
- Drive Type: Dual high-power H-bridge driver
-- Flash size: 4MByte
Paket :
=============
- 1 X NODEMCU LUA WIFI V3 4MB 32MBITS CH340 FLASH ESP8266 ESP12 + KABEL MICRO USB
========
Deskripsi :
=================================
Hallo,,, !!! slamat datang di lapak/toko kita "CNC STORE BANDUNG" :-)
Board LOLIN ini ukurannya lebih besar dari yang versi DOIT!
Bord ini merupakan board yang dapai kita pakai untuk berbagai projek IOT, Board ini merupakan versi ke-3 (V3) dimana lebih setabil dari versi-versi sebelumnya tentunya.
Untuk pemrogramannya sendiri tentu bisa kita perogram melalui aplikasi IDE arduino. Tutorialnya seabrek di google gan,, :-)
Spesifikasi :
=================================
- Uses FT232 instead of CP2102.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength FT232 for superior stability on all supported platforms.
- Communication interface voltage: 3.3V.
- Antenna type: Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0: 1 channel ADC
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature: -40 ~ + 125
- Drive Type: Dual high-power H-bridge driver
-- Flash size: 4MByte
Paket :
=============
- 1 X NODEMCU LUA WIFI V3 4MB 32MBITS CH340 FLASH ESP8266 ESP12 + KABEL MICRO USB
Ada masalah dengan produk ini?
ULASAN PEMBELI
Diambil dari Tokopedia & TikTok Shop by Tokopedia