5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp26.780.000
Arc Fusion Splicer SWIFT KF4 Active V-Groove Alignment
Rp26.780.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Fusion Splicer
Specification :
- Fiber alignment : IPAAS, Active V-Groove Alignment.
- Applicable type of fibers : 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable.
- Fiber count : Single fiber.
- Applicable fiber dimensions : Cladding diameter : 125㎛, Coating diameter : 100㎛~3mm.
- Fiber setting and cleaved length : 5mm to 16mm.
- Splicing modes : Splice mode: 300, Heat mode: 100.
- Typical splice Loss : SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB.
- Return loss : > 60dB.
- Splicing time : Typical 7sec with SM.
- Splice loss estimate : Available.
- Sleeve heating time : Typical 13sec with IS-60 mode, IS-60 sleeve.
- Applicable protection sleeve : 60mm, 40mm and micro sleeves.
- Storage of splice result : Data : 5,000ea Up to, Image : 5,000ea Up to.
- Tension test : 1.96N to 2.25N.
- Operating condition : Altitude : 0 to 5,000m above sea level,Temperature : -10 to 50deg C,Wind : 15m/sec Humidity : 0 to 95% RH, non-Condensation, dust proof, water proof, shock proof.
- Storage condition : Temperature: -40℃~80℃, Humidity: 0~95%.
- Dimension : 124(W) x 189(L) x 75(H)mm (Without rubber protector).
- Weight : 1.1kg(Including battery).
- Viewing method and display : 2 AXIS Two CMOS cameras with 3.5-inch color LCD monitor.
- Fiber view and magnification : X/Y : 130X , Max :260X.
- Power supply : Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger.
- No. of splice cycles with battery : Typical 200 cycles.
- Electrode life : 3,000 splices.
- Terminals : USB.
Garansi resmi 1 tahun.
Note :
Mohon tanyakan terlebih dahulu untuk ketersediaan produk.
- Fiber alignment : IPAAS, Active V-Groove Alignment.
- Applicable type of fibers : 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable.
- Fiber count : Single fiber.
- Applicable fiber dimensions : Cladding diameter : 125㎛, Coating diameter : 100㎛~3mm.
- Fiber setting and cleaved length : 5mm to 16mm.
- Splicing modes : Splice mode: 300, Heat mode: 100.
- Typical splice Loss : SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB.
- Return loss : > 60dB.
- Splicing time : Typical 7sec with SM.
- Splice loss estimate : Available.
- Sleeve heating time : Typical 13sec with IS-60 mode, IS-60 sleeve.
- Applicable protection sleeve : 60mm, 40mm and micro sleeves.
- Storage of splice result : Data : 5,000ea Up to, Image : 5,000ea Up to.
- Tension test : 1.96N to 2.25N.
- Operating condition : Altitude : 0 to 5,000m above sea level,Temperature : -10 to 50deg C,Wind : 15m/sec Humidity : 0 to 95% RH, non-Condensation, dust proof, water proof, shock proof.
- Storage condition : Temperature: -40℃~80℃, Humidity: 0~95%.
- Dimension : 124(W) x 189(L) x 75(H)mm (Without rubber protector).
- Weight : 1.1kg(Including battery).
- Viewing method and display : 2 AXIS Two CMOS cameras with 3.5-inch color LCD monitor.
- Fiber view and magnification : X/Y : 130X , Max :260X.
- Power supply : Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger.
- No. of splice cycles with battery : Typical 200 cycles.
- Electrode life : 3,000 splices.
- Terminals : USB.
Garansi resmi 1 tahun.
Note :
Mohon tanyakan terlebih dahulu untuk ketersediaan produk.
Ada masalah dengan produk ini?