Arc Fusion Splicer SWIFT KF4A Active V-Groove Alignment

Specification : - Fiber alignment : IPAAS Clad to Clad Alignment. - Applicable type of fibers : 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable. - Fiber count : Single fiber. - Applicable fiber dimensions : Cladding diameter : 125㎛, Coating diameter : 150㎛~3mm. - Fiber setting and cleaved length : 5mm to 16mm. - Splicing modes : Splice mode: 300, Heat mode: 100. - Typical splice Loss : SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB. - Return loss : gt; 60dB. - Splicing time : Typical 7sec with SM. - Splice loss estimate : Available. - Sleeve heating time : Typical 13sec, IS-60 mode with IS-60 sleeve. - Applicable protection sleeve : 60mm, 40mm and micro sleeves. - Storage of splice result : Data : Up to 5,000ea (Image : Up to 5,000pcs). - Tension test : 1.96N to 2.25N. - Operating condition : Altitude : Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof. - Storage condition : Temperature: -40℃~80℃, Humidity: 0~95%. - Dimension : 132(W) x 212(L) x 73(H)mm (Without rubber protector). - Weight : 1.5kg(Including battery). - Viewing method and display : 2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor. - Fiber view and magnification : X/Y : 110X , Max :220X. - Power supply : Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger. - No. of splice cycles with battery : Typical 200 cycles. - Electrode life : 21,000 splices. - Blade lifetime* : 75,000 fibers. - Terminals : USB. * Blade lifetime is not guaranteed. It may vary depending on the operating environment. Garansi resmi 1 tahun. Note : Mohon tanyakan terlebih dahulu untuk ketersediaan produk.