CISCO AIR-PWRINJ6 AIRONET POWER INJECTOR 802.3AT 30 W

Deskripsi :
yang ready saat ini : box CISCO, plastik CISCO, adapter oem CISCO ke pabrik Phihong

The Cisco Aironet Power Injector AIR-PWRINJ6= increases wireless LAN
deployment flexibility of supported Cisco Aironet Access Points by providing
an alternative powering option to local power, inline power-capable
multiport switches, and multiport power patch panels.
The single-port PoE injector provides up to 30 Watts and is compliant with
IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W) systems. This power injector
is for use with the Cisco Aironet 2800 series and 3800 series access points.

Output 55V 0.6A

Note The Cisco Aironet Power Injector AIR-PWRINJ6= is not weatherproof and
hence is not meant to be used outdoors.

A Category 5 or better Ethernet cable connects the injector to a 10/100/1000
Ethernet switch, hub, or network, and another cable carries power and data
to the access point's WAN Ethernet port. The power injector's built-in power
supply has a C13 connector that connects to a wall outlet or power strip.
The power injector connects to a wall outlet or power strip.

Caution To avoid overheating and possible failure, do not stack or tie
together (bundle) the power injector and its AC power cable.

The AIR-PWRINJ6= should not be installed in the plenum airspace.

The maximum distance that is supported for in-line power is 328 ft. (100 m),
including the length of the 6.5-ft. (2-m) Ethernet cable provided with the
power injector.