Atur jumlah dan catatan
Stok Total: 70
Subtotal
Rp267.000
ROBOTDYN ARDUINO UNO R3 CH340G ORIGINAL
Rp267.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Controller
Deskripsi ROBOTDYN ARDUINO UNO R3 CH340G ORIGINAL
Uno R3 - compatible with Arduino Uno R3 board. Built on the Atmel ATmega328 microcontroller and USB-UART interface chip CH340G.
Board for functionality similar to the Arduino Uno (ATmega 168/328). It is a budget, but the same stable, and uses the original chips Atmel ATmega (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 - connects to the computer via micro USB cable (used for almost all Android smartphones).
You can supply power to board through the Micro USB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
SPESIFIKASI :
* Microcontroller : ATMega328
* USB-TTL converter : CH340G
* Power Out : 5V-800mA
* Power IN. USB : 3.3V (180mA max.)
* Power IN. VIN/DC Jack : 7-9V
* Power Consumption : 5V 800mA
* Logic Level : 5V
* USB : Micro USB
* Clock Frequency : 16MHz
* Operating Supply Voltage : 5V
* Digital I/O : 14(6-PWM)
* Analog I/O : 8
* Memory Size : 16Kb/32 Kb
* Data RAM Type/Size : 2Kb
* Data ROM Type/Size : 1Kb
* Interface Type : ISP
* Operating temperature : 40/+85
* LengthWidth : 53.3468.58mm
KELENGKAPAN :
* 1pcs ROBOTDYN ARDUINO UNO R3 CH340G ORIGINAL
Uno R3 - compatible with Arduino Uno R3 board. Built on the Atmel ATmega328 microcontroller and USB-UART interface chip CH340G.
Board for functionality similar to the Arduino Uno (ATmega 168/328). It is a budget, but the same stable, and uses the original chips Atmel ATmega (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 - connects to the computer via micro USB cable (used for almost all Android smartphones).
You can supply power to board through the Micro USB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
SPESIFIKASI :
* Microcontroller : ATMega328
* USB-TTL converter : CH340G
* Power Out : 5V-800mA
* Power IN. USB : 3.3V (180mA max.)
* Power IN. VIN/DC Jack : 7-9V
* Power Consumption : 5V 800mA
* Logic Level : 5V
* USB : Micro USB
* Clock Frequency : 16MHz
* Operating Supply Voltage : 5V
* Digital I/O : 14(6-PWM)
* Analog I/O : 8
* Memory Size : 16Kb/32 Kb
* Data RAM Type/Size : 2Kb
* Data ROM Type/Size : 1Kb
* Interface Type : ISP
* Operating temperature : 40/+85
* LengthWidth : 53.3468.58mm
KELENGKAPAN :
* 1pcs ROBOTDYN ARDUINO UNO R3 CH340G ORIGINAL
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan