AEMC (2137.61) - Power and Energy Logger Model PEL 102

Power and Energy Logger Model PEL 102 (No LCD, No Sensors) Catalog 2137.61

Brand : AEMC Instruments

Model PEL 102 - Cat. #2137.61 (LCD, without sensors): Includes small classic tool bag, no, 5 ft USB cable, (4) black test leads and alligator clips, 5 ft 115V power cord, (12) color-coded ID markers, safety and compliance sheets, 8 GB SD-Card with USB-SD-Card reader, printed Quick Start Guide, and USB drive with DataView software and a user manual.

Specification
GENERAL
Sampling Frequency 128 samples per cycle; 50/60Hz (16 samples/cycle 400Hz)
Data Storage Rate 1 per second
Demand Period Storage Rate User selectable (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes)
Recorded Parameters
(Single- and Poly-Phase) V, I, W, VA, var, PF, Tan, Wh, VAh, VARh, THD (V and I),
Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF
Event Log Tracks and records status changes and error messages along with recorded data
Front Panel Indicator LEDs Bluetooth active, recording in progress, phase connection reversal, overload, battery charging and SD Card status
Storage Capacity 2GB SD card (included) is used for storage. SD cards (up to 2GB); SDHC cards (4 to 32GB) formatted FAT32 are supported
INPUTS Voltage 3 voltage input channels via 4mm safety banana jacks
Current 3 current input channels via custom 4 pin jacks that accept AEMC probes and sensors

ELECTRICAL
VOLTAGE MEASUREMENT RANGE RESOLUTION * ACCURACY (% of Reading)
50/60Hz 42.5 to 69Hz - ±0.1Hz
Single-Phase RMS Voltages 10 to 1000Vrms 0.1V ±0.2% Rdg ± 0.2V
Phase-to-Phase RMS Voltages 17 to 1700Vrms 0.1 to 1V ±0.2% Rdg ± 0.4V
400Hz 340 to 460Hz - -
Single-Phase RMS Voltages 10 to 600Vrms 0.1V ±1% Rdg ± 1V
Phase-to-Phase RMS Voltages 17 to 1200Vrms 0.1 to 1V ±1% Rdg ± 1V
DC 100 to 1000V 0.1V ±1% Rdg ± 3V (typical)
PT Ratios Programmable from 50V to 65,0000V 0.01V to 0.1V -
CURRENT MEASUREMENT
Current Probe: MiniFlex Sensor MA193*** 200mA to 100Arms 1 to 100mA ±1.2% ± 50mA