Anki 3D Models .stl Vector Robot Treads - emerald

PLEASE READ FULL DESCRIPTION!!!!!

Vector Robot 3D Printed Treads (Formerly Anki Vector) - Does not fit Cozmo

You will get one set of treads for your Vector in the color and tread pattern of your choice. (One set = 2 treads)

(mohon menyertakan Tread Pattern Dan Color di kolom catatan tambahan Pelanggan^^)

4 tread patterns with optional extra flair on 3 of them (see close up of green round knobby with flair)

1- Diagonal bar - Directional tread ** See note below

2- Original bar with or without flair

3- Square Knobby with or without flair

4 - Round Knobby with or without flair

These treads are 3D printed in a flexible plastic, but they are not quite as rubbery as the original, so vector may have trouble rolling his cube. Otherwise, he should have no issues backing onto his charger, doing wheel stands, or any other actions he performs. The inner "nubs" are slightly smaller than the original, but I have tested them on my own vector for over a year, and they work great!

These can fit on Cozmo but are wider than his original tracks. See other listing in my shop for Cozmo 3D Printed Treads!

Please note, this listing for the 3d printed treads only and does not include the Vector Robot

** Note about the Diagonal Bar Tread Pattern: A few people that have ordered the Diagonal Bar Tread Pattern have let me know that their Vector has trouble making contact with his charger. This is due to the fact that they are slightly thicker than his original treads. On 4/8/20, all tread versions were made slightly thinner to help prevent this from happening. If you have this issue, please let me know.

Tread Pattern:

Original Bar

Diagonal Bar

Square Knobby

Round Knobby


Color:

RED

ORANGE

YELLOW

GREEN

WHITE

EMERALD

BLUE

TEAL

PURPLE

VIOLET

BLACK

(mohon menyertakan Tread Pattern and color pada kolom pesan tambahan pelanggan)