5.0/ 5.0
100% pembeli merasa puas
4 rating • 0 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp6.385.000
IFI Go Pod Bluetooth 5.2 DAC / AMP Module Connector For Earphone
Rp6.385.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: IFI
GO wireless. GO pod.
The GO pod is a pair of wearable Bluetooth DAC/headphone amps designed to make your premium in-ear monitors (IEMs) wireless. It is the first device in the world to support Hi-Res 96kHz/24bits with LDAC and Qualcomm Snapdragon Sound Bluetooth codecs on TWS.
Hi-res Bluetooth
Qualcomm’s 24-bit aptX Adaptive format is also covered, offering sample rates of up to 96kHz, with the additional benefit of QHS (Qualcomm High Speed) providing an extra 300kbps of bandwidth. Other supported codecs include regular aptX, AAC and SBC.
Connectors abound
IEM manufacturers use a variety of connection types, but whichever is used by your favourite brand iFi has it covered. The GO pod’s detachable ear loop contains the IEM connector, and these are interchangeable. The standard GO pod package contains the 0.78mm 2pin and MMCX connectors. Pentaconn, T2 and A2DC connectors are available separately.
Charge!
The GO pod comes with a smartly designed charging case, with softly lined internal compartments and sufficient room to accommodate connected IEMs as well as the pods themselves. A 1500mAH rechargeable battery is built into the charging case; a pair of GO pods will play for up to seven hours on a single charge.
Qualcomm’s Snapdragon Sound
We always go to great lengths to ensure our Bluetooth technology is state-of-the-art. The GO pod continues this uncompromising approach, including certification for Qualcomm’s Snapdragon Sound platform and Bluetooth 5.2 for optimum range, speed and reliability. In addition to Bluetooth processing, Qualcomm’s QCC5144 chipset can be configured to perform digital-to-analogue conversion and headphone amplification too.
Balanced
With a power output of 120mW into 32 ohms, and an output voltage of 4V into high-impedance 300-ohm loads, each GO pod supplies plenty of gas to drive any connected IEM with consummate ease, without rapidly draining the internal battery. There are four settings – 16 ohms, 32 ohms, 64 ohms and 300 ohms.
The GO pod is a pair of wearable Bluetooth DAC/headphone amps designed to make your premium in-ear monitors (IEMs) wireless. It is the first device in the world to support Hi-Res 96kHz/24bits with LDAC and Qualcomm Snapdragon Sound Bluetooth codecs on TWS.
Hi-res Bluetooth
Qualcomm’s 24-bit aptX Adaptive format is also covered, offering sample rates of up to 96kHz, with the additional benefit of QHS (Qualcomm High Speed) providing an extra 300kbps of bandwidth. Other supported codecs include regular aptX, AAC and SBC.
Connectors abound
IEM manufacturers use a variety of connection types, but whichever is used by your favourite brand iFi has it covered. The GO pod’s detachable ear loop contains the IEM connector, and these are interchangeable. The standard GO pod package contains the 0.78mm 2pin and MMCX connectors. Pentaconn, T2 and A2DC connectors are available separately.
Charge!
The GO pod comes with a smartly designed charging case, with softly lined internal compartments and sufficient room to accommodate connected IEMs as well as the pods themselves. A 1500mAH rechargeable battery is built into the charging case; a pair of GO pods will play for up to seven hours on a single charge.
Qualcomm’s Snapdragon Sound
We always go to great lengths to ensure our Bluetooth technology is state-of-the-art. The GO pod continues this uncompromising approach, including certification for Qualcomm’s Snapdragon Sound platform and Bluetooth 5.2 for optimum range, speed and reliability. In addition to Bluetooth processing, Qualcomm’s QCC5144 chipset can be configured to perform digital-to-analogue conversion and headphone amplification too.
Balanced
With a power output of 120mW into 32 ohms, and an output voltage of 4V into high-impedance 300-ohm loads, each GO pod supplies plenty of gas to drive any connected IEM with consummate ease, without rapidly draining the internal battery. There are four settings – 16 ohms, 32 ohms, 64 ohms and 300 ohms.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan