Atur jumlah dan catatan
Stok Total: 88
Subtotal
Rp3.433.000
AAA+ Ultra-thin Mini Hitbox Style Arcade Joystick Fight Stick Game Controller For PC PC, Switch, PI, Android, PS3 With Light
Rp3.433.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Support hot swap
The keycap is 3D printed, if you are not satisfied, you can replace it by yourself, 24MM red shaft
Buttons
GP2040 uses a generic button labeling for gamepad state, which is then converted to the appropriate input type before sending. This table provides a map of GP2040 buttons to the supported input types and layouts:
GP2040 XInput Switch PS3 DirectInput Arcade
B1 A B Cross 2 K1
B2 B A Circle 3 K2
B3 X Y Square 1 P1
B4 Y X Triangle 4 P2
L1 LB L L1 5 P4
R1 RB R R1 6 P3
L2 LT ZL L2 7 K4
R2 RT ZR R2 8 K3
S1 Back Minus Select 9 Coin
S2 Start Plus Start 10 Start
L3 LS LS L3 11 LS
R3 RS RS R3 12 RS
A1 Guide Home - 13 -
A2 - Capture - 14 -
If you do not have a dedicated Home button, you can activate it via the S1 + S2 + UP button combination.
Input Modes
To change the input mode, hold one of the following buttons as the controller is plugged in:
B1 for Nintendo Switch
B2 for XInput
B3 for DirectInput/PS3
Input mode is saved across power cycles.
D-Pad Modes
You can switch between the 3 modes for the D-Pad while the controller is in use by pressing one of the following combinations:
S1 + S2 + DOWN - D-Pad
S1 + S2 + LEFT - Emulate Left Analog stick
S1 + S2 + RIGHT - Emulate Right Analog stick
D-Pad mode is saved across power cycles.
SOCD Modes
Simultaneous Opposite Cardinal Direction (SOCD) cleaning will ensure the controller doesn't send invalid directional inputs to the computer/console, like Left + Right at the same time. There are 3 modes to choose from while the controller is in use by pressing one of the following combinations:
S2 + A1 + UP - Up Priority mode: Up + Down = Up, Left + Right = Neutral (Hitbox behavior)
S2 + A1 + DOWN - Neutral mode: Up + Down = Neutral, Left + Right = Neutral
S2 + A1 + LEFT - Last Input Priority (Last Win): Hold Up then hold Down = Down, then release and re-press Up = Up. Applies to both axes.
SOCD mode is saved across power cycles.
Invert D-Pad Y-axis
A toggle is available to invert the Y-axis input of the D-pad, allowing
The keycap is 3D printed, if you are not satisfied, you can replace it by yourself, 24MM red shaft
Buttons
GP2040 uses a generic button labeling for gamepad state, which is then converted to the appropriate input type before sending. This table provides a map of GP2040 buttons to the supported input types and layouts:
GP2040 XInput Switch PS3 DirectInput Arcade
B1 A B Cross 2 K1
B2 B A Circle 3 K2
B3 X Y Square 1 P1
B4 Y X Triangle 4 P2
L1 LB L L1 5 P4
R1 RB R R1 6 P3
L2 LT ZL L2 7 K4
R2 RT ZR R2 8 K3
S1 Back Minus Select 9 Coin
S2 Start Plus Start 10 Start
L3 LS LS L3 11 LS
R3 RS RS R3 12 RS
A1 Guide Home - 13 -
A2 - Capture - 14 -
If you do not have a dedicated Home button, you can activate it via the S1 + S2 + UP button combination.
Input Modes
To change the input mode, hold one of the following buttons as the controller is plugged in:
B1 for Nintendo Switch
B2 for XInput
B3 for DirectInput/PS3
Input mode is saved across power cycles.
D-Pad Modes
You can switch between the 3 modes for the D-Pad while the controller is in use by pressing one of the following combinations:
S1 + S2 + DOWN - D-Pad
S1 + S2 + LEFT - Emulate Left Analog stick
S1 + S2 + RIGHT - Emulate Right Analog stick
D-Pad mode is saved across power cycles.
SOCD Modes
Simultaneous Opposite Cardinal Direction (SOCD) cleaning will ensure the controller doesn't send invalid directional inputs to the computer/console, like Left + Right at the same time. There are 3 modes to choose from while the controller is in use by pressing one of the following combinations:
S2 + A1 + UP - Up Priority mode: Up + Down = Up, Left + Right = Neutral (Hitbox behavior)
S2 + A1 + DOWN - Neutral mode: Up + Down = Neutral, Left + Right = Neutral
S2 + A1 + LEFT - Last Input Priority (Last Win): Hold Up then hold Down = Down, then release and re-press Up = Up. Applies to both axes.
SOCD mode is saved across power cycles.
Invert D-Pad Y-axis
A toggle is available to invert the Y-axis input of the D-pad, allowing
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan