Function Generator CyberTech CFG-1005B

Specifications Frequency - Range: • Sine: 10μHz ~ 5MHz • Square: 10μHz ~ 5MHz • Others: 10μHz ~ 1MHz - Resolution: 10μHz - Accuracy: ±50ppm Waveform - Type: 16 waveform, Sine, Square, Ramp, Exp, Log, Noise, etc. - Length: 1024 points - Sampling Rate: 100 MSa/s - Vertical Resolution: 8 bits - Sine: • Harmonic Distortion: ≤-40dBc(≤5MHz); ≤-35dBc( gt;5MHz) • Total Distortion: ≤0.5% (20Hz ~ 20kHz, 20Vpp) - Square: • Rise/Fall Edge Time: ≤35ns, Overshoot: ≤ 10 % • Duty Cycle: 0.1% ~ 99.9% • Ramp Symmetry: 0.0% ~100.0% Amplitude - Range: • Frequency≤8MHz: 0 ~ 10Vpp(50Ω), 0 ~ 20Vpp(Open circuit) • Frequency gt;8MHz: 0 ~ 9Vpp(50Ω), 0 ~ 18Vpp(Open circuit) - Resolution: 5mVpp(Amplitude gt;2Vpp), 0.5mVpp(Amplitude≤2Vpp) DC Offset (Ampl. 0Vpp) - Range: ±5Vdc (50Ω), ±10Vdc (Open circuit) - Resolution: 5mVdc Modulation - FM, AM • Carrier Waveform: 16 waveforms, Sine, Square, Ramp, etc. (only Pulse for PWM) - PM, PWM: • Modulating Waveform:16 waveforms, Sine, Square, Ramp, etc. • Modulating Frequency: 40mHz ~ 20kHz - FSK: • Carrier Waveform: 16 waveforms, Sine, Square, Ramp, etc. • Modulating Waveform: Square • FSK Rate: 40mHz ~ 100kHz Frequency Sweep - Type: Linear or Logarithmic - Sweep Time: 50ms ~ 500s - Trigger Source: Internal/External/Manual Burst - Burst Waveform: 16 waveforms, Sine, Square, Ramp, etc. - Burst Count: 1 ~ 1000000 - Internal Period: 1μs ~ 20s - Start Phase: 0° ~ 360° - Trigger Source: Internal/External/Manual SYNC Output - Electrical Level: TTL compatible - Waveform Characteristic: Square, edge time ≤ 20ns - Output Level: low level lt;0.3V, high level gt;4V General Characterisctics - Power: AC 100 ~ 240V, 45 ~ 65Hz, lt; 20VA - Display: LCD display - Dimension amp; Weight: 322×256×102mm, Approx.1.5kg