POWER SUPPLY S8FS-G05024CD OMRON ORIGINAL

Tolong konfirmasi ketersediaan stock dan harga sebelum order

Power ratings : 50 W
Input voltage : 100 to 240 VAC (Permissible range 85 to 264 VAC, 80 to 370 VDC)
Output voltage (VDC) : 24 V
Output current : 2.2 A
Built-in fan : None
Efficiency :
- 100 VAC input : 86% typ.
- 200 VAC input : 89% typ
- 230 VAC input : 89% typ.
Input :
- Voltage range : Single phase, 85 to 264 VAC, 80 to 370 VDC
- Frequency : 50/60 Hz (47 to 450 Hz)
Current :
- 100 VAC input : 1.1 A typ.
- 200 VAC input : 0.62 A typ.
Leakage current :
- 100 VAC input : 0.5 mA max.
- 200 VAC input : 1 mA max
Inrush current (for a cold start at 25°C) :
- 100 VAC input : 14 A typ.
- 200 VAC input : 28 A typ
Output :
- Rated Output Current : 2.2A
- Voltage adjustment range : −10% to 15% (with V.ADJ)
- Ripple & Noise voltage : 100 to 240 VAC input = 60 mVp-p max.
- Input variation influence : 0.5% max.
- Load variation influence : 1.0% max
- Temperature variation influence : 100 to 240 VAC input = 0.05%/°C max.
- Startup time :
• 100 VAC input : 1,000 ms max.
• 200 VAC input : 1,000 ms max
- Hold time :
• 100 VAC input : 10 ms typ.
• 200 VAC input : 55 ms typ.
Additional functions :
- Overload protection : Yes, automatic reset
- Overvoltage protection : Yes, 120% or higher of rated output volt
age, power shut off (shut off the input voltage and turn on the input again)
- Overheat protection : No
- Series operation : Yes (For up to two Power Supplies, external diodes are required.)
- Parallel operation : No (However, backup operation is possible, external diodes are required.)
- Remote sensing : No
- Remote control : No
- Output indicator : Yes (LED: Green)
Insulation :
- Withstand voltage :
• 3 kVAC for 1 min. (between all input terminals and output terminals) current cutoff 20 Ma
• 2 kVAC for 1 min. (between all input terminals and PE terminals) current cutoff 20 mA
• 1 kVAC for 1 min. (between all output terminals and PE terminals) current cutoff 20 mA
- Insulation resistance : 100 MΩ min. (between all o