Atur jumlah dan catatan
Stok Total: 97
Subtotal
Rp5.769.000
Universal Treadmill Controller for ICON PROFORM Nordic Track Nordictrack Reflex IC-Board LCD Display control panel Circuit Board
Rp5.769.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
SELAMAT DATANG
General USE Universal Treadmill Controller for ICON PROFORM Nordic Track Nordictrack Reflex IC-Board LCD Display control panel Circuit Board
Specifications & List：
1. Part Model: Universal Controller
2. Application: for treadmill repair.
3. Quantity: Controller system (kit) * 1pcs.
（Controller+LCD display+Cable+Security key）
4. 110V/220V can use.
5. Warranty time: 90 days.
6. Stocking time: 1-7 days.
important hint：
1. Since this is a "specially programmed" generic controller.
2. Therefore this ordering link is for ICON PROFORM Nordic Track Nordictrack Reflex treadmills only.
3.Default MAX speed: 12km/h
Adjust MAX speed: 16km/h
4. For use with ICON PROFORM Nordic Track Nordictrack Reflex treadmill only.
5. Only supports 1-4HP/90-230V DC motors. AC motors are not supported.
6.This controller set can work 100% without a speed sensor, so no need to worry.
7. Only 3-pin tilt sensor is supported.
Do not order or contact us if your treadmill is 2-pin incline sensor.
Please make sure:
a. Motor performance OK
b. Transmit function OK, especially belt, lubrication normal.
c. Only work for home treadmill use DC motor.
Real picture ↓
for ICON PROFORM Nordic Track Nordictrack Reflex
Controller type discrimination↓
FAQ:
A. How to set Max speed 16km/h?(defaut max speed 12km/h)
1. remove safety key
2. press"mode" button for 3 seconds until you see 100
3. press"start" button twice until you see 102, the number on the right side of 102 is the default max speed--12
4. press speed+ to adjust the max speed, 16 max
5. press"start" button to save this setting
6. put safety key on display--OK now.
B: how do I connect speed sensor?
No need speed sensor for this kit
C. is it possible to adjust the inclination? the inclination is not flat.
YES, steps as below
1. remove safety key
2. press"mode" button for 3 seconds until you see 100
3. press"start" button several times until you see 105
4. 105=10.1 stands for incline function, 10.5=10.0 no
General USE Universal Treadmill Controller for ICON PROFORM Nordic Track Nordictrack Reflex IC-Board LCD Display control panel Circuit Board
Specifications & List：
1. Part Model: Universal Controller
2. Application: for treadmill repair.
3. Quantity: Controller system (kit) * 1pcs.
（Controller+LCD display+Cable+Security key）
4. 110V/220V can use.
5. Warranty time: 90 days.
6. Stocking time: 1-7 days.
important hint：
1. Since this is a "specially programmed" generic controller.
2. Therefore this ordering link is for ICON PROFORM Nordic Track Nordictrack Reflex treadmills only.
3.Default MAX speed: 12km/h
Adjust MAX speed: 16km/h
4. For use with ICON PROFORM Nordic Track Nordictrack Reflex treadmill only.
5. Only supports 1-4HP/90-230V DC motors. AC motors are not supported.
6.This controller set can work 100% without a speed sensor, so no need to worry.
7. Only 3-pin tilt sensor is supported.
Do not order or contact us if your treadmill is 2-pin incline sensor.
Please make sure:
a. Motor performance OK
b. Transmit function OK, especially belt, lubrication normal.
c. Only work for home treadmill use DC motor.
Real picture ↓
for ICON PROFORM Nordic Track Nordictrack Reflex
Controller type discrimination↓
FAQ:
A. How to set Max speed 16km/h?(defaut max speed 12km/h)
1. remove safety key
2. press"mode" button for 3 seconds until you see 100
3. press"start" button twice until you see 102, the number on the right side of 102 is the default max speed--12
4. press speed+ to adjust the max speed, 16 max
5. press"start" button to save this setting
6. put safety key on display--OK now.
B: how do I connect speed sensor?
No need speed sensor for this kit
C. is it possible to adjust the inclination? the inclination is not flat.
YES, steps as below
1. remove safety key
2. press"mode" button for 3 seconds until you see 100
3. press"start" button several times until you see 105
4. 105=10.1 stands for incline function, 10.5=10.0 no
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan