ISP TECHNOLOGIES DECI-MATE II G MICRO DECIMATOR PEDAL

Other noise gates have a release knob compromise to adjust the release response in an attempt to best match the release to your playing style. With a typical gate, if you set a fast release to remove noise, the instant you stop playing the long sustained notes will either get an undesirable cutoff or will chop off the signal with a very ugly modulated release as the signal decays. The DECI-MATE G provides a fully adaptive release response, which tracks the envelope of the signal and instantly changes the release from super fast to a long, smooth release for sustained notes. The new Decimator X technology is based on our new patent pending “Time Vector Integration” which eliminates any modulation of the sustained note. This allows long sustained notes to providing amazingly smooth and transparent release response. Also, the DECI-MATE G won’t alter your tone. The DECI-MATE G is a full analog design without any digital artifacts or aliasing for the most transparent noise reduction available. Full Decimator G String in MICRO Pedal package Loop INPUT and OUTPUT on 3.5mm TRS / Interface Y cable included True Bypass Design New DECIMATOR X Technology uses Time Vector Integration. Adaptive release provides smoothest release response possible Adaptive release tracks both staccato and long sustained notes Adaptive tracking response tracks any playing style Greater than 90db effective noise reduction Superior design to noise gates using downward expansion with adaptive release Pedal Type : Guitar Noise Reduction Inputs : 1X Guitar Input ¼ inch Input Impedance : 500k ohms Maximum Input Level : +10 dbU Output : 1X ¼ inch Maximum Noise Reduction : Greater than 90db Release Response : Adaptive over 1000 to 1 ratio True Bypass : Yes Chassis Size : 3.7 inches x 1.5 inches x 1.3 inches Power Input : 9VDC 40 milliamp minimum / tip :negative / sleeve : positive Power Supply Included : NO