KOKKO KMF-1 Multi Effect Guitar Pedal

This Multi Effects Processor provides various effects and amplifier models,
tweaking it with knobs on the panel, and find your tone easily.
The Cabinet simulation is based on IR ( Impulse Response) tech, reappears a lot of classical Cab, and driven by vivid tube amp simulation, the world famous amplifiers is just right in the box.


Specification
* Effects:
Amp/Cab -18
Drive -12
Delay- 6
Reverb -4
Dynamic-4
Filter -3
Modulation -12
○ Effect chain: 5 blocks
○ Preset: 10~59 .
IR Samping: 512 point
* Power: 9V DC, 300mA (Center Negative)
◦ Dimensions:243(L)x165(W)x59(H)mm Weight:710g

1. Memory/Stomp/Edit Button
Press this button to switch between Memory/Stomp/Edit Button.
2. Setting Button
Press this button to Enter/Exit setting mode.
3. Adjustment Knob Set
Use this set also with Knob 4 to adjust parameters.
4. Adjustment and Select Knob
Use this knob also with Knob set 3 to adjust parameters Press this knob to
Select/Back.
5. Drum Machine Button
Press this button to Enter/Exit Drum Machine.
＠
8-9.�TFootswitch
In Memory mode, this set change presets In Stomp mode, this set
select different blocks and turn on/off blocks In Edit mode, this set
change different pedals/amps.
10. Control Pedal
This pedal works as exp/vol pedal depends on different setting.
11.Aux In Input
Connect 3.5mm input here to play backing track.
12. Signal Input
Connect guitar to this socket.
6. Block Select Button
Press this set of buttons to select different blocks.
13. Output/Headphone
Connect amp or headphone to this socket(6.35mm).
14. USB-C
Connect PC to this for firmware update.
15. Power supply
Connect power supply to here.