STC-1000 STC-3000 STC-3008 STC-3018 LED Digital Temperature

STC-1000 STC-3000 STC-3008 STC-3018 LED Digital Temperature Controller Thermostat Thermoregulator Incubator 12V 24V 110V 220V Featur : Is Smart Device : no Measure Type : K Screw : M6*1 Cable Length : 1M Type : K Theory : Temperature Controller Usage : Household Model Number : STC-1000 STC-3000 STC-3008 STC-3018 Temperature Controller Termostato Max Measuring Temperature : 100C - 119C Display Type : DIGITAL Power Type : Charger Display Size : 1.9 Inches amp; Under Style : Embedded Brand Name : Aideepen Origin : Mainland China Certification : NONE STC-1000 STC-3000 STC-3008 STC-3018 LED Digital Temperature Controller Thermostat Thermoregulator Incubator 12V 24V 110V 220V Modle: STC-1000 Switch the modes between cool and heat ; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error. Technical Parameters: 1.Temperature measuring range: -50 C ~ 99 C 2.Resolution: 0.1 C; 3.Accuracy:+- 1 C (-50 C ~ 70 C); 4.Sensor error delay: 1 minute 5.Power supply:AC 110-220V 50/60Hz, DC 12V, DC 24V, DC12-72V( Choose power supply when you place order) ; 6.Power consumption: = temperature set value + difference value, and the refrigerating relay is connected; If the Cool indicator light flashes, it indicates the refrigerating equipment is under compressor delay protect status; when the measuring temperature values temperature set value, the Cool indicator light on, and refrigerating relay disconnects. System starts heating when the measuring temperature value = temperature set value, the #34;Heat #34; indicator light is off, and the heat relay disconnects. Error/Alarm description Alarm when sensor error: Controller activate the sensor error alarm mode when sensor open circuit or short circuit, all therunning status is closed Thanks for shopping