HW-166 TB6612FNG VCC 2.7-5.5V Dual Motor Driver Shield Driving Board

Dear, welcome to Redkee HW-166 VCC 2.7-5.5V Dual Motor Driver Shield Motor Control Driving Board Module TB6612FNG Microcontroller Feature: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A 3.2A crest. Two input signals IN1 and IN2 can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs A and B can be separately controlled, the speed of ea motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. CJMCU. Logic supply voltage VCC can be in the range of 2.7-5.5VDC, while the motor supply VM is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per or up to 3.2A for a short, single pulse. Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1 #34; pit headers; the pins are arranged su that input pins are on one side and output pins are on the other. Standby control to save power. Built-in thermal shutdown circuit and low voltage detection circuit. Filter capacitors on the two power lines. Specification: Power supply voltage: VM=15V max, VCC=2.7-5.5V Output current: Lout=1.2A average value/3.2A crest value Product size: 20.520.53mm Product weight: 5g Packing size: 505015mm Package weight: 5g Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2mm measuring deviation due to manual measurement. Included: 1 X TB6612FNG Module 2 X 8pin Needle Tube