GPON SANet OLT60-G16E / OLT

GPON Features:  Compliant with ITU-T G.984.x standard.  High splitter rate, each PON port supports up to 128 ONU and 1K T-CONT.  Support of five types T-CONT bandwidth profile Support of multiple ONU authentication mechanism: SN, Password, SN plus Password, Loid, LoidPassword. Support of DBA (Dynamic Bandwidth Allocation).  Support of ranging and logical distance configuration.  Support of upstream and downstream FEC enabling/disabling. Support of AES encryption. Port:  Support of bi-directional bandwidth control.  Support of static link aggregation and dynamic LACP (Link Aggregation Control Protocol). Support of port mirroring and traffic mirroring. Multicast:  Static multicast.  IGMPv1/v2/v3.  IGMP Snooping/Proxy.  MLD Snooping/Proxy.  Support of multicast across different VLAN QoS:  Support of rate-limit based on port or self-defined service flow.  Support of priority remark based on port or self-defined service flow and provide 802.1P, DSCP priority and Remark. Support of QoS scheduling based on port and self-defined service flow, support of 8 priority queues, scheduler algorithm is SP, WRR, or SP plus WRR Support of congestion avoid mechanism. User Security:  Support of anti-ARP-spoofing.  Support of anti-ARP-flooding.  Support of port isolation and ONU isolation control.  Support of binding among IP, MAC, VLAN and port.  Support of IPv4 DHCP relay option 82 and 60.  Support of IPv6 DHCP relay option 37 and 18. Device Security: Support of anti-DoS attack. Support of hierarchical management and password protection. Network Security:  Support of port-based broadcast/multicast suppression. Support of L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet. Network Management:  CLI (Command Line Interface).  CLI (Command Line Interface).  NMS (Network Management System) via SNMP interface.